StarTech.com MOD4AVHD Handleiding

StarTech.com Niet gecategoriseerd MOD4AVHD

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com MOD4AVHD (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

Manual Revision: 11/09/2018

Product Diagram

Actual product may vary from photos.

Front View

Rear View

Package Contents

• A/V Module x 1

• Universal Power Adapter x 1

• Power Clips (NA, EU, UK) x 3

• Mounting Bracket x 1

• Mounting Bracket Screws (M5 x 20 mm) x 4

• Module Screws (#6-32 x 3/16”) x 8

• Quick-Start Guide x 1

SKU #: MOD4AVHD

A/V Connectivity Module for BOX4MODULE and BEZ4MOD

Requirements

• Power Source (i.e. AC Electrical Outlet)

Installation Requirements:

• Mounting Surface

• Mounting Bracket x 1

• Mounting Bracket Screws (M5 x 20 mm) x 4

• Module Screws (#6-32 x 3/16”) x 4

• Writing Utensil x 1

• Phillips Head Screwdriver x 1

For the latest requirements, please visit:

www.startech.com/MOD4AVHD.

Installation

See the Installation section in the Modular Conference Table

Box (BOX4MODULE) or Single-Module Conference Table Box

(BEZ4MOD) for instructions on how to install a User Manual

Module.

These can be found under the tab at: User Manuals Support

www.startech.com/BOX4MODULE

www.startech.com/BEZ4MOD

(Optional) Mounting the Module

Note: StarTech.com is not responsible for any damages related to

the installation of this product.

Note: Before mounting the , consider the desired Module

orientation of the ports (front and rear).

1. Align the with four on the Mounting Bracket Mounting Holes

Module.

Note: There are four on each side of the Mounting Holes

Module, which gives you two dierent mounting options.

2. Insert the (x4) through the Module Screws Mounting Bracket

and into the .Mounting Holes

3. Tighten the using a . Module Screws Phillips Head Screwdriver

Do not overtighten the Module Screws.

4. Before installing the on or under yourMounting Bracket

Mounting Surface Mounting , measure and position the

Bracket Module in the desired location. The can be mounted on

a vertical or horizontal .Mounting Surface

5. (Optional) Depending on the you are using Mounting Surface

to install the product, you may need to drill pilot holes prior to

installing the into the Mounting Bracket Screws Mounting

Surface.

6. Mark the location of the using a Mounting Holes Writing

Utensil. These marks can be used as a guide to indicate where

the will be installed in the surface.Mounting Bracket Screws

7. Install the Mounting Bracket Screws (x4) through the Mounting

Bracket Mounting Surface Phillips Head and into the , using a

Screwdriver Mounting Bracket Screws. Do not overtighten the .

Warning: To prevent the from Mounting Bracket Screws

penetrating the opposite side of the , be Mounting Surface

conscious of the length of the Mounting Bracket Screws

compared to the depth of the .Mounting Surface

For the latest information, specications, and support visit www.startech.com/MOD4AVHD

Power

LED

Reset

Button

RJ45

Passthrough

Port

VGA In

Port

Audio

In Port

HDMI

In Port

DisplayPort

In Port

RJ45

Passthrough

Port

HDMI

Out

Port

Audio

Out

Port

5V 2A

Port

VGA In

Port

Audio

In Port

HDMI

In Port

DisplayPort

In Port

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

• Wiring terminations should not be made with the product and/or electric lines under power.

• Product installation and/or mounting should be completed by a certied professional as per

the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed to avoid creating

electric, tripping or safety hazards.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous

tension.

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles

électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et

dans le respect des normes locales et du code de construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et

acheminés de façon à éviter tout risque électrique, de chute ou de sécurité

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

• 電源が入っている状態の製品または電線の終端処理を行わないでください。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよ

うにしてください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche

sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico

professionale certicato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da

evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är

strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt

gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för

snubblingsolyckor och andra olyckor kan undvikas.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and

on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or

modications not expressly approved by StarTech.com could void the user’s authority to operate

the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com.

Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of their

respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide

industry-leading solutions. If you ever need help with your product, visit www.startech.com/

support and access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty. StarTech.com warrants its products against defects

in materials and workmanship for the periods noted, following the initial date of purchase. During

this period, the products may be returned for repair, or replacement with equivalent products at

our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its

products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,

directors, employees or agents) for any damages (whether direct or indirect, special, punitive,

incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If

such laws apply, the limitations or exclusions contained in this statement may not apply to you.

To view manuals, FAQs, videos, drivers, downloads, technical drawing, and more, visit www.startech.com/support.

Quick-Start Guide

Startech.com Ltd.

45 Artisans Cres.

London, Ontario

N5V 5E9

Canada

StarTech.com LLP

2500 Creekside Pkwy.

Lockbourne, Ohio

43137

U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd., Brackmills

Northampton

NN4 7BW

United Kingdom

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

IT: it.startech.com

JP: jp.startech.com

NL: nl.startech.com

SKU #: MOD4AVHD

Powering the Module

1. On the bottom of the , connect the A/V Connectivity Module

Universal Power Adapter DC 5V 2A Port to the .

2. Tighten the on the Lock Screw Universal Power Adapter’s

Barrel Connector, to ensure connectivity.

3. Connect the other end of the to an Universal Power Adapter

appropriate .Power Source

Connecting a Device to the Module

For instructions on how to connect devices to the see Module

the Connecting Devices to the Top of the Module and Connecting

Devices to the Bottom of the Module sections in the .User Manual

The can be found under the tab at: User Manual Support

www.startech.com/MOD4AVHD.

LED Indicator

Power

Solid LED (White)

• Indicates that the is active (the A/V Connectivity Module

Universal Power Adapter AC is correctly connected to an

Electrical Outlet).

LED O

• Indicates that the is not correctly Universal Power Adapter

connected to an or the is not AC Electrical Outlet A/V Module

receiving power from the .AC Electrical Outlet

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	MOD4AVHD
Kleur van het product:	Zwart
Gewicht:	200 g
Breedte:	105 mm
Diepte:	110 mm
Hoogte:	60 mm
Type stekker:	Type M
Gewicht verpakking:	200 g
Breedte verpakking:	100 mm
Diepte verpakking:	250 mm
Hoogte verpakking:	210 mm
LED-indicatoren:	Stroom
AC-adapter ingangsspanning:	100 - 240 V
Stroom:	0.4 A
Ethernet LAN:	Ja
Maximum resolutie:	3840 x 2160 Pixels
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	CE, FCC, REACH
Ondersteunde beeldverhoudingen:	16:9
Audio-ingangen:	2 x 3.5mm
Audio-uitgang:	1 x 3.5 mm
HDMI versie:	1.4
Ondersteunde grafische resoluties:	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
Aantal HDMI-invoerpoorten:	2
Duurzaamheidscertificaten:	RoHS
Aantal DisplayPorts:	2
VGA (D-Sub) invoer ports:	2
Temperatuur bij opslag:	-20 - 60 °C
AC-adapter, uitgangsspanning:	5 V
AC-adapter, uitgangsstroom:	2 A
DisplayPort versie:	1.2
Inclusief schroeven:	Ja
Montagebeugels meegeleverd:	Ja
Aantal HDMI-uitvoerpoorten:	1
Chipset:	Parade - PS176, Chrontel - CH7035, Explore Micro - EP9442U, TI - TS3DV642
Externe voeding:	Ja
Stroomverbruik (typisch):	10 W
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
USB pass-through:	Nee