StarTech.com ICUSB234854I Handleiding

Bekijk gratis de handleiding van StarTech.com ICUSB234854I (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over StarTech.com ICUSB234854I of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 03/22/2018

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/ICUSB234854I.

Package contents

• 1 x USB serial hub

• 1 x USB-B with screw lock to USB-A cable

• 1 x DIN rail kit

• 1 x instruction manual

Requirements

• USB-enabled computer with an available USB 2.0 port

• Any of the following operating systems:

• Microsoft Windows® 10, 8/8.1, 7

• Microsoft Windows Server® 2012, 2008, 2003

• macOS High Sierra (10.13), Sierra (10.12) El Capitan (10.11),

Yosemite (10.10), Mavericks (10.9)

• Linux® kernel 3.5 to 4.11.x, LTS versions only

• Phillips type screwdriver

Operating system requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/ICUSB234854I.

ICUSB234854I

4-Port Industrial USB to Serial Adapter Hub - RS-232/RS-422/RS-485

DIN Rail and Wall Mountable

*actual product may vary from photos

Product diagram

1

3

4

1. RS-232/422/485 ports

2. Power LED

3. Power adapter port

4. USB 2.0 host port

5. Port send/receive LED

6. Port mode LED

2

6

5

Pinouts

RS-232 mode

RS-485 2-wire

mode

RS-422/RS-485

4-wire mode

Congure port settings

The serial adapter hub supports four dierent modes (RS-232, RS-

422, RS-485 2-wire, and RS-485 4-wire) with dierent power and

termination options. You can set the mode and settings for each

individual port by adjusting the jumpers inside the serial adapter

hub’s housing. To access the jumpers, open the access panel on the

back of the housing using a Phillips type screwdriver to remove the

two screws.

Jumper groups for each port

Each port has its own set of jumpers that enable you to assign the

settings for each individual port.

Port 1

Port 2Port 3

Port 4

Installation

Notes:

• You may need to restart your computer during the software

installation process. Be sure to save any unsaved material before

you install the software.

• Congure your port settings before installing the USB serial hub.

1. Download the latest software from the StarTech.com website:

www.StarTech.com/ICUSB234854I.

2. The software that corresponds with your operating system will be

compressed in a .zip folder. Download and extract the contents

of that folder to a location on your computer that’s easy to access,

such as your or folder. DesktopDownloads

3. Open the folder that corresponds with your specic operating

system and launch the installer le.

4. Follow the on-screen prompts to complete the installation, and if

instructed to do so, restart your computer.

5. Connect each of your serial devices to the port you’ve congured

for their connection.

6. Connect the USB-A to USB-B cable to the USB 2.0 port on the USB

serial hub and to a USB port on your computer.

7. (Optional) If you require AUX power (fully loaded) connect your

power adapter to an AC outlet, then connect the Power adapter

port to the USB serial hub.

Product specificaties