StarTech.com ET91000LC2 Handleiding

Bekijk gratis de handleiding van StarTech.com ET91000LC2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.2 sterren uit 3 reviews. Heb je een vraag over StarTech.com ET91000LC2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 11/03/2017

For the most up-to-date information, please visit: www.startech.com

Rear View (ET91000LC2 / ET91000SC2)

ET91000LC2 / ET91000SC2

Gigabit Ethernet to Multi Mode LC/SC Fiber Media Converter - 550m

Packaging Contents

• 1 x Fiber Media Converter

• 1 x Universal Power Adapter

• 4 x Power Adapter Plugs (NA/UK/EU/AU)

• 1 x Grounding Screw

• 1 x Instruction Manual

System Requirements

• 1000BASE-T compatible Ethernet network equipment

• RJ45 terminated UTP Cat5e or better Ethernet cable

• 1000BASE-SX compatible ber optic network equipment

• LC or SC terminated multi mode ber optic cable

• Available AC electrical outlet

Installation

1. Make sure the DIP switches are set appropriately for your network

conguration (see “DIP Switch Settings“ section for details).

2. Connect the ber optic network cable from a computer/switch/

media converter to the LC/SC connector on the media converter.

NOTE: When connecting the ber cable, make sure to connect the

Tx (transmit) terminal on one end, with the Rx (receive) terminal on

the other end.

3. Connect a UTP Ethernet cable, from a computer/switch to the

RJ45 jack on the media converter.

4. Connect the power adapter to the media converter.

5. The following example illustrates the connection scheme when

connecting from a 1000BASE-T Ethernet port of a hub/switch to

a 1000BASE-SX port of another hub/switch, through the ber

media converter:

6. The following example illustrates the connection scheme

when connecting from a 1000BASE-T Ethernet port on a hub/

switch to a 1000BASE-T Ethernet Network Interface Card (NIC)

in a computer through the ber media converter:

Dip SwitchLED Indicators

Card Release

Thumbscrew

RJ45 Ethernet

connector

LC Duplex Fiber

connector

DC Power connector

Ground point (optional)

*actual product may vary from photos

ET91000LC2

Dip Switch

LED Indicators

Card Release

Thumbscrew

RJ45 Ethernet connector

SC Duplex Fiber

connector

ET91000SC2

Product specificaties