StarTech.com DKT31CHDVCM Handleiding

Bekijk gratis de handleiding van StarTech.com DKT31CHDVCM (2 pagina’s), behorend tot de categorie Holló. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.2 sterren uit 9 reviews. Heb je een vraag over StarTech.com DKT31CHDVCM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 5, 2020 12:26 PM

Product Diagram (DKT31CHDVCM)

Component Function

1RJ45 Port• Used to connect the to a Docking Station

Network Device.

2DisplayPort Port

• Used to connect a to the Display Device

Docking Station.

Note: The connected must be Host Laptop

enabled with DP ALT Mode.

3HDMI Port

• Used to connect a to the Display Device

Docking Station.

Note: The connected must be Host Laptop

enabled with DP ALT Mode.

4VGA Port

• Used to connect a to the Display Device

Docking Station.

Note: The connected must be Host Laptop

enabled with DP ALT Mode.

5USB-A Port x 2

• Used to connect a to USB Peripheral Device

the . Docking Station

• Allows you to fast-charge devices that comply

with USB Battery Charging specication

Revision 1.2.

• Supports up to 5V at 1.5A, 7.5W charging.

USB-C™ 10Gbps Single Monitor Mini Docking Station with HDMI, DP, or VGA | PD | 24cm Wrap Around Cable

6USB-C Port

• Used to connect a to USB Peripheral Device

the .Docking Station

• Supports up to 5V at 1.5A, 7.5W charging.

• Can also be used for PD Pass Through.

7USB-C Connector• Used to connect the to a Docking Station

Host Laptop.

Requirements

For the latest requirements, please visit www.startech.com/DKT31CHDVCM

Host

• A Laptop with USB-C or Thunderbolt 3 port and with DP ALT Mode enabled x 1

Display

• VGA, HDMI, or DisplayPort compatible x 1

Cables (depends on conguration)

• VGA Cable x 1

• HDMI Cable x 1

• DisplayPort Cable x 1

• CAT5e/6 Cable x 1

Powering the Docking Station

1. Unravel the from the , by holding Wrap Around CableDocking Station Housing

onto the and gently pulling the cable outward, away from the USB-C Connector

Docking Station Housing.

2. Connect the to a USB-C or Thunderbolt 3 port on the USB-C ConnectorHost

Laptop.

Connecting a Display to the Docking Station

When more than one is connected to the , the rst DisplayDocking StationDisplay

that was connected will be the active until the is disconnected from Display Display

the. The priority when you have three monitors connected to the Docking Station

Docking Station is as follows: DisplayPort -> HDMI -> VGA.

DisplayPort

• Connect a (sold separately) to the on the DisplayPort CableDisplayPort Port

Docking StationDisplay Device and the other end to a DisplayPort port on a .

HDMI

1

2

345 67

Product specificaties