HID Identity OMNIKEY 5022 Handleiding

Bekijk gratis de handleiding van HID Identity OMNIKEY 5022 (2 pagina’s), behorend tot de categorie Holló. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over HID Identity OMNIKEY 5022 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PLT-02395, Rev A.6

OMNIKEY®

Smart Card Readers

Installation Guide

© 2010-2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form

without the prior written permission of HID Global Corporation.

HID Global, HID, the HID Brick logo, the Chain Design, iCLASS, OMNIKEY, and Seos are the trademarks or registered trademarks of HID Global, ASSA ABLOY AB,

or its aliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are

trademarks or registered trademarks of their respective owners.

eBase Models

OMNIKEY 1021, 3021, 3121, 5021, 5022,

5023, 5025, 5027, 5127, 5421, 5422, 5427, 6121

Americas and Corporate

611 Center Ridge Drive

Austin, TX 78753

USA

Asia Pacific

19/F 625 King’s Road

North Point, Island East

Hong Kong

Europe, Middle East and Africa

Phoenix Road

Haverhill, Suolk CB9 7AE

United Kingdom

www.hidglobal.com/support

Drivers and Manuals: www.hidglobal.com/omnikey

Introduction

This guide describes physical behaviour and conformities of

OMNIKEY Smart Card Readers.

1021 USB - Desktop smart card reader in a small form factor for

desktop and mobile usage.

3021 USB - High-performance smart card reader, with a USB

interface and small form factor for desktop and mobile usage.

3121 USB - High-performance smart card reader for desktop use with

multiple standing base options in a robust housing.

5021 USB - Contactless Reader with USB interface for desktop use

that reads/writes to 13.56 MHz smart cards.

5022 USB - Contactless Reader with USB CCID-compliant interface

for desktop use that reads/writes to 13.56 MHz smart cards.

5023 USB - A 5022 Reader with Secure Element, which supports

iCLASS® and Seos®.

5027 USB - Contactless Reader with USB Keyboard Wedge interface

for desktop use that reads 13.56MHz smart cards including iCLASS

and Seos.

5025 CL USB - Contactless Reader with USB CCID-compliant

interface for desktop use that reads contactless (125 kHz) Prox cards.

5127 / 5427 CK/ 5427 UE USB - Contactless 13.56MHz/125kHz

reader with CCID/Keyboard wedge interface.

5127CK MINI / 5127CK MODULAR MINI - Contactless

13.56MHz/125kHz reader with CCID-compliant/Keyboard wedge/

UART interface and BLE.

5427 Gen2 - Contactless 13.56MHz/125kHz reader with CCID/

Keyboard wedge interface and BLE.

5421 / 5422 USB - Dual interface PC-linked reader that reads/writes

to 13.56 MHz contactless cards and virtually any contact smart card.

5422 includes CCID.

6121 Mobile USB - Dongle-sized smart card reader for SIM-sized

smart cards, especially well suited for use with mobile devices.

Parts

Smart Card Reader

Installation Guide

Find drivers, reader documentation supporting various operating

systems at: www.hidglobal.com/omnikey

See the application note for card loading and handling instructions

at: www.hidglobal.com/omnikey

Specifications and Installation

For further information, contact HID support:

www.hidglobal.com/support

For driver setup, consult the OMNIKEY Smart Card User Guide.

CAUTION: Install the drivers prior to attaching the OMNIKEY reader

with the computer.

ATTENTON: Vous devez installer le driver avant de connecter le

lecteur OMNIKEY à l’ordinateur.

USB Connected Reader Specifications

Operating Temperature32°F to 131°F (0°C to 55°C)

PC Connector Cable

59.1 in (150 cm)

1021, 3021, 3121, 5021, 5022, 5023,

5025 CL, 5027, 5422, 5427 G2

78.7 in (200 cm)

5421, 5427 CK

Mean Time Between

Failures (MTBF)

500,000 Hours

Host InterfaceUSB 2.0 CCID (USB 1.1 Compatible)

Host Data

Transmission Speed

12 Mbps (USB 2.0 Full Speed)

Power SupplyBus Powered

USB Connected Reader Installation

1. Connect the reader with computer; plug the USB connector into

your computer’s USB port.

2. When the reader is operational, the LED illuminates.

3. For contactless operation, hold the card next to the reader logo.

For contact smart cards, insert the card into the reader with

contacts facing up.

4. The LED blinks when the reader is exchanging data with a card

(reading/writing).

To ensure that RF exposure levels remain at or below the tested

levels, a minimum safe separation distance of 10 cm between the

user and the reader is required for US/Canadian RF exposure

compliance.

Pour garantir que les niveaux d’exposition aux RF restent égaux ou

inférieurs aux niveaux testés, une distance de sécurité minimale de 10

cm entre l’utilisateur et le lecteur est requise pour être conforme aux

normes américaines et canadiennes en matière d’exposition aux RF.

Product specificaties