StarTech.com CMDUCT2U2 Handleiding

Bekijk gratis de handleiding van StarTech.com CMDUCT2U2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over StarTech.com CMDUCT2U2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: June 22, 2022 4:16 PM

Product Diagram (CMDUCT2U2)

Front View

ComponentFunction

1Mounting Ears• Secures the to the Duct Cable Management Panel

rack

2Duct Cover• Keeps cables out of the way, and it can be removed for

installation or upgrades

3Cable Management

Fingers

• Allows cables to be inserted and held in place

• Available along the length on both sides

4Duct Cover Latches

• Each corner of the Duct Cable Management Panel

has a latching mechanism that keeps the Duct Cover

in place

5Cable Path• Allow the inserted cables to run o to the side of the

Duct Cable Management Panel

Rear View

ComponentFunction

1Pass-through Holes• Insert the cables through the Pass-through Holes as

needed

2U Horizontal Finger Duct Cable Management Panel for Racks - Includes Cover

Package Contents

• Horizontal Cable Duct x 1

• M6x12 mm Screws x 4

• M6 Cage Nuts x 4

• M6 Plastic Washers x 4

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit: www.startech.com/CMDUCT2U2

• Phillips head screwdriver

• Cage nut tool (Optional)

Installation

1. Determine the or on the of the rack U Height NumberMounting Location Posts

where to install the .Duct Cable Management Panel

2. Install the (x 4) onto the on theM6 Square Cage NutsSquare Cage Nut Holes

chosen. Use a if available or your preferred U Height NumberCage Nut Tool

installation method.

3. Align the with the previously inserted on the Mounting EarsM6 Square Cage Nuts

rack posts.

4. Insert the (x 4) onto the (x 4). Use a M6 Plastic WashersM6x12 mm ScrewsPhillips

Head ScrewdriverM6x12 ScrewsDuct Cable to install the (x 4) and fasten the

Management PanelMounting Posts to the of the rack.

Operation

1. Insert the cables through the and the Cable Management FingersPass-through

Holes at the rear. Organize as desired.

2. Latch and secure the using the (x 4).Duct CoverDuct Cover Latches

1

5

4

3

1

2

Product specificaties