StarTech.com CABSHELFV2U-12-RACK Handleiding

Bekijk gratis de handleiding van StarTech.com CABSHELFV2U-12-RACK (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.5 sterren uit 7 reviews. Heb je een vraag over StarTech.com CABSHELFV2U-12-RACK of wil je andere gebruikers van dit product iets vragen? Stel een vraag

For additional self-service support options and community forums, please visit: www.StarTech.com/support

Revision: August 29, 2024

Quick-Start Guide

Product ID

CABSHELFV2U-16-RACK

CABSHELFV2U-12-RACK

CABSHELFV1U-16-RACK

FeatureFunction

1

Front Mounting

Brackets

• Used to fasten the to the of a ShelfMounting PostsServer

Rack

2Shelf Surface • Place Server Rack Equipment

3Ventilation Holes• Promote airow for the Server Rack Equipment

Package Contents

• 2-Post Vented Shelf x1

• M5 Cage Nuts x 4

• M5 Screws x 4

• Quick-Start Guide x 1

Vented 2-Post Shelf

Requirements

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit:

www.StarTech.com/CABSHELFV2U-16-RACK

www.StarTech.com/CABSHELFV2U-12-RACK

www.StarTech.com/CABSHELFV1U-16-RACK

• Refer to the manufacturer of the Server Rack to determine the mounting hole type and

size

• Phillips head screwdriver

• Cage nut tool (Optional)

Warnings!

• Read the entire Quick-Start Guide and ensure the instructions are fully understood before

using this product.

• Before adding equipment to this product, ensure this product has been properly mounted.

• Never operate this product if parts are missing or damaged.

• Ensure the weight of the equipment does not exceed the weight capacity of this product. If

the weight capacity is exceeded, personal injury or damage to the equipment is possible.

• These product can support the following weight:

• CABSHELFV2U-16-RACK: 44lb / 20kg

• CABSHELFV2U-12-RACK: 25lb / 11.3 kg

• CABSHELFV1U-16-RACK: 30lb / 14kg

Installation

1. Identify a suitable location on the to mount the . The requires Server RackShelfShelf

2U 1U Mounting Space orof(depending on the model).

Note: The Server Rack should have enough Mounting Depth to accommodate the Shelf.

2. Install the (x 4) into the (x 4) on the of the M5 Cage Nuts Mounting HolesFront Posts

ServerRackCage Nut Tool . If available, use a or a preferred installation method to

install the . Cage Nuts

Note:If the Server Rack has M5 threaded holes, skip this step. The M5 Screws can be

installed without the M5 Cage Nuts.

Usethe manufacturer-recommended Screws for the Server Rack if they dier from M5.

3. Position the onto the at the chosen , determined inShelfServer Rack U Height

*Product may vary from image

1

2

3

1

Product specificaties