StarTech.com BRNCHLOCK Handleiding

StarTech.com slot BRNCHLOCK

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com BRNCHLOCK (2 pagina's) in de categorie slot. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram (BRNCHLOCK)

Components Function

1Reset Screw

• Used to set a new combination.

Note: Once the combination is changed, if you

lose the new combination you will not be able to

reset the combination.

2Guide Line

• Used to enter a combination on the . Dials

• Align the combination digits with the Guide

Line.

3Release Button • Used to release the from the .Lock Lock Slot

4Bumper Spacers • Prevents the from scratching the Lock

connected Device.

5Locking Hook • Used to connect the to a Lock Lock Slot.

6Security Cable • Used to secure a to a secure stationary Device

object.

7Dials • Used to enter the combination.Lock’s

Laptop Lock Loop

Requirements

For the latest requirements, please visit www.startech.com/BRNCHLOCK.

• = 0-0-0-0Default Combination

Installing the Lock Spacers (Optional)

The comes with three dierent sized (1 mm, 2 mm, and 3 Laptop Lock Loop Spacers

mm). The helps prevent the from scratching the connected Spacer Laptop Lock Loop

Device, as well as create a tighter t, reducing the amount of movement once the

Laptop Lock Loop Device is connected to a .

1. When you have selected the you want to use, remove the adhesive backing Spacer

from the Spacer.

2. Align the hole in the over top of the , so that the is Spacer Lock Tip Lock Tip

protruding through the hole.

3. Firmly press down on the adhering it to the .Spacer Lock

Setting a New Combination

4. Align the numbers on the with the using the default combination Dial Guide Line

0-0-0-0.

5. Insert a (sold separately) into the and push the Flathead Screwdriver Reset Screw

Reset Screw Lock in toward the .

6. With the pushed in, turn the clockwise 90 degrees. Reset Screw Reset Screw

7. Rotate each of the to the desired number.Dials

8. Insert the into the and turn the Flathead Screwdriver Reset Screw Reset Screw

counter-clockwise 90 degrees moving the , back to its original position. Reset Screw

The will pop back out once it is in the original position.Reset Screw

Note: Be sure to write down the new combination and keep it in a secure location

away from the lock.

9. To set a new combination follow steps 1 - 5 using the new combination set up in

Step 4 instead of the default combination.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Unlocking a Device

1. Enter the new combination that was created in the Setting a New Combination

section.

2. Press and hold the button. The locking mechanism will disengage from the Release

Lock Slot Device on the .

3. Pull the out of the .Lock Lock Slot

Locking a Device

1. Pull a cable lock through the on the , creating a branch.Loop Laptop Lock

Pulling a Cable Lock Through the Laptop Lock’s Loop

2. Press and hold the and insert the into the Release Button Locking Hooks Lock Slot

on a or any other compatible .Laptop, Docking Station, Device

3. Release the to engage the lock and rotate the .Release Button Dials

Product specificaties

Merk:	StarTech.com
Categorie:	slot
Model:	BRNCHLOCK
Kleur van het product:	Zwart, zilver
Gewicht:	68 g
Breedte:	55 mm
Diepte:	205 mm
Hoogte:	20 mm
Gewicht verpakking:	82 g
Breedte verpakking:	130 mm
Diepte verpakking:	220 mm
Gebruikershandleiding:	Ja
Kabelslot sleuf type:	Kensington
Certificering:	RoHS, TAA, REACH
Aantal per verpakking:	1 stuk(s)
Beste gebruik:	Notebook
(Buitenste) hoofdverpakking hoogte:	245 mm
(Buitenste) hoofdverpakking breedte:	270 mm
(Buitenste) hoofdverpakking lengte:	285 mm
Hoeveelheid per (buitenste) hoofdverpakking:	40 stuk(s)
Code geharmoniseerd systeem (HS):	83014090
Diameter van de kabel:	4.4 mm
Slot type:	Combinatieslot
Aantal combinaties:	10000