StarTech.com LTANCHORL Handleiding

Bekijk gratis de handleiding van StarTech.com LTANCHORL (2 pagina’s), behorend tot de categorie slot. Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over StarTech.com LTANCHORL of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 21, 2019 11:10 AM

Product Diagram (LTANCHORL)

Note: Security Cable and Lock sold separately.

ComponentFunction

1Security Plate

• Used to hide the Mounting Screws.

• Used to prevent access to the Mounting

Screws.

2Desk Anchor

• Used in place of a stationary object to secure a

connected Device.

Requirements

For the latest requirements, please visit www.startech.com/LTANCHORL.

Installation

Notes: The Desk Anchor is not recommend for use outdoors, in high humidity

conditions, on glass, ceramic tile, or water absorbent materials.

The following surface types must have a primer applied before the Desk Anchor can

be properly installed: copper, brass, or plasticized vinyl.

For maximum security, it is recommended that both Adhesive Backing and

Mounting Screws are used when installing the Desk Anchor.

Laptop Lock Anchor - Large

1

1. Position the Desk Anchor on the surface you wish to mount it to.

Desk Anchor

Note: Use a pencil to draw an outline around the Desk Anchor. This will ensure that

you know the area you need to score using the Abrasive Pad.

2. Use the Abrasive Pad (included) to score the surface area you intend to mount the

Desk Anchor on. Be careful to only score the surface that the Desk Anchor will

cover.

3. Use the Alcohol Pad (included) to clean the scored surface prior to installation.

Allow the alcohol to dry before installing the Desk Anchor on the surface.

Note: (Optional) Use the Screw Holes on the Desk Anchor as a guide to drill pilot

holes.

4. Remove the Adhesive Backing on the back of the Desk Anchor, exposing the

adhesive surface. Secure the Desk Anchor to the scored area. Apply the adhesive

backing to the surface at room temperature 60 °F (16°C).

5. Before connecting a Security Cable to the Desk Anchor, allow the adhesive

backing at least 24 hours to bond to the surface.

6. Insert the Mounting Screws (x2) into the Mounting Holes on the Desk Anchor.

Installing the Mounting Screws

2

Product specificaties