StarTech.com BRACKET125PT Handleiding

Bekijk gratis de handleiding van StarTech.com BRACKET125PT (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over StarTech.com BRACKET125PT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

*actual product may vary from photos

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 07/10/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/BRACKET125PT.

BRACKET125PT

2.5” SSD/HDD Mounting Bracket for 3.5” Drive Bay - Tool-less Installation

Read and understand the entire manual before Important:

you use this product, and follow the instructions as they are

outlined in the manual.

Failure to do so might result in property damage or device

failure.

Introduction

You can use the BRACKET125PT to install a 2.5 in. SSD (solid-state

drive) or HDD (hard disk drive) into a 3.5 in. drive bay. The tool-less

design of the BRACKET125PT makes it easy to install drives.

Product diagram

Package contents

• 1 x 2.5 in. SSD/HDD to 3.5 in. mounting bracket

• 6 x plastic pegs

• 1 x instruction manual

System requirements

• Computer with an available 3.5 in. drive bay

• One 2.5 in. SSD or HDD

The operating system of your computer will detect the drive and

automatically install it.

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/BRACKET125PT.

Plastic post

Plastic peg

Install the drive and bracket

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your drives, you may experience lost data as a result. Always

handle storage devices with caution. Make sure that you’re properly

grounded by wearing an anti-static strap when you install any

computer component. If an anti-static strap isn’t available, touch a

large grounded metal surface for several seconds to discharge any

built-up static electricity.

1. Remove the six from the that are Plastic pegsPlastic posts

attached to the mounting bracket.

2. Pull the o of the mounting bracket and discard the Plastic posts

posts.

3. Align your SSD or HDD with the Tenons(plastic projections) on

the mounting bracket, and gently push the drive into place.

4. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external hard drives, and

so on).

5. Unplug the power cable from the back of your computer.

6. Disconnect any peripheral devices that are connected to your

computer.

7. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

8. Place the bracket into the 3.5 in. hard drive slot, and use the

Plastic pegs that you removed in step 1 to secure the drive in

place.

9. Connect a power connection from the computer’s power supply

to the drive’s power connector.

(continued on next page)

Tenon

(plastic projections)

Product specificaties