StarTech.com ADJSHELFHDV2 Handleiding

Bekijk gratis de handleiding van StarTech.com ADJSHELFHDV2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.5 sterren uit 5 reviews. Heb je een vraag over StarTech.com ADJSHELFHDV2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 9, 2022 12:07 PM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram

ADJSHELFHDV2

ComponentFunction

1Shelf Surface • Mount the server rack equipment

2Ventilation Holes

• Promote air ow for the mounted equipment. The

dimensions are 1.6 x 0.25 in (40 x 6.5 mm)

3Front Mounting Brackets

• Fasten Shelf to the Front Posts of the rack or

cabinet

• Holes on the sides of the Mounting Brackets allow

for Depth Adjustment. M6x12 mm Screws (x 4)

secure the Mounting Brackets to the desired depth

• Allows for up to 5.7 in (146.9 mm ) depth adjustment

4Rear Mounting Brackets

• Fasten Shelf to the Rear Posts of the rack or cabinet

• Holes on the sides of the Mounting Brackets allow

for Depth Adjustment. M6x12 mm Screws (x 4)

secure the Mounting Brackets to the desired depth

• Allows for up to 13 in (332.1 mm) depth adjustment

1U 4-Post Vented Adjustable Mounting Depth Heavy Duty Shelf - 27.5 in Depth

Package Contents

• 1U Shelf Body x 1

• Front Mounting Brackets x 2

• Rear Mounting Brackets x 2

• M6x12 mm Screws x 8

• M6 Cage Nuts x 8

• M6 Plastic Washers x 8

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations

of conformance, please visit: www.StarTech.com/ADJSHELFHDV2

• For square cage holes, M6 cage nuts are included. For M6 threaded holes, no cage

nuts are needed. Refer to the manufacturer of the rack to determine the mounting

hole type

• Phillips head screwdriver

• Cage nut tool (Optional)

Warnings!

Read the entire Quick-Start Guide and ensure the instructions are fully understood

before assembling and using this product.

Before adding equipment to this product, ensure this product has been properly

mounted.

Never operate this product if parts are missing or damaged.

Ensure the weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, personal injury or damage to the

equipment is possible. This product can support the following weight: up to 330 lb

(150 kg). The maximum supported weight is only possible when all four mounting

brackets are properly mounted to all posts on a four post rack.

Arrange your equipment in the rack in descending order of weight. The lightest

equipment is installed at the top of the rack, and the heaviest is on the bottom.

Installation

1. Locate a suitable location in the rack or cabinet to mount the Shelf. The Shelf

requires 1U of Space.

Tomount the shelf leveled, ensure the mounting brackets are mounted on the same U

height number. To determine this, most four posts racks or cabinets have labeled front

and rear posts.

*Product may vary from image

3

1

4

2

Product specificaties