StarTech.com ADJSHELFHD2 Handleiding

Bekijk gratis de handleiding van StarTech.com ADJSHELFHD2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over StarTech.com ADJSHELFHD2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 9, 2022 10:06 AM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product Diagram

ADJSHELFHD2

ComponentFunction

1Shelf Surface • Mount the server rack equipment

2Front Mounting Brackets

• Fasten to the of the rack or ShelfFront Posts

cabinet

• Holes on the sides of the allow Mounting Brackets

for . (x 4)Depth Adjustment M6x12 mm Screws

secure the to the desired depth Mounting Brackets

• Allows for up to 5.7 in (146.9 mm ) depth adjustment

3Rear Mounting Brackets

• Fasten to the of the rack or cabinetShelfRear Posts

• Holes on the sides of the allow Mounting Brackets

for . (x 4)Depth AdjustmentM6x12 mm Screws

secure the to the desired depthMounting Brackets

• Allows for up to 13 in (332.1 mm) depth adjustment

1U 4-Post Adjustable Mounting Depth Heavy Duty Shelf - 27.5 in Depth

Package Contents

• 1U Shelf Body x 1

• Front Mounting Brackets x 2

• Rear Mounting Brackets x 2

• M6x12 mm Screws x 8

• M6 Cage Nuts x 8

• M6 Plastic Washers x 8

• Quick-Start Guide x 1

Requirements

For the latest manuals, product information, technical specications, and declarations

of conformance, please visit: www.StarTech.com/ADJSHELFHD2

• For square cage holes, M6 cage nuts are included. For M6 threaded holes, no cage

nuts are needed. Refer to the manufacturer of the rack to determine the mounting

hole type

• Phillips head screwdriver

• Cage nut tool (Optional)

Warnings!

Readthe entire Quick-Start Guide and ensure the instructions are fully understood

before assembling and using this product.

Beforeadding equipment to this product, ensure this product has been properly

mounted.

Neveroperate this product if parts are missing or damaged.

Ensurethe weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, personal injury or damage to the

equipment is possible. This product can support the following weight: up to 264 lb (120

kg). The maximum supported weight is only possible when all four mounting brackets

are properly mounted to all posts on a four post rack.

Arrangeyour equipment in the rack in descending order of weight. The lightest

equipment is installed at the top of the rack, and the heaviest is on the bottom.

Installation

1. Locate a suitable location in the rack or cabinet to mount the . The Shelf Shelf

requires of. 1U Space

Tomount the shelf leveled, ensure the mounting brackets are mounted on the same U

height number. To determine this, most four posts racks or cabinets have labeled front

and rear posts.

*Product may vary from image

2

1

3

Product specificaties