StarTech.com 8N515S12-POWER-STRIP Handleiding

Bekijk gratis de handleiding van StarTech.com 8N515S12-POWER-STRIP (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over StarTech.com 8N515S12-POWER-STRIP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 17, 2023

Product Diagram

Industrial Power Strip with Surge Protection

Package Contents

• Power Strip x 1• Mounting Screws x 4

• Foot Pads x 4• Mounting Template x 1

• Quick-Start Guide x 1

Requirements

• Available AC Power Source (NEMA 5-15R Outlet)

• Painters Tape (Optional for Temporary Mounting)

• Phillips Head Screwdriver (Optional for Temporary Mounting)

• Drill with a 9/64 in. Drill-Bit (Optional for Temporary Mounting)

For the latest drivers, manuals, product information, technical specications, and

declarations of conformance, please visit: www.StarTech.com/support

2

ComponentFunction

1Built-in Power Cable

• Connect to an AC Power Source

• NEMA 5-15P Connector

• 125V AC / 15A

2

Power Switch, LED &

Circuit Breaker

• Turns all Outlets On or O

• Illuminates Red When the Outlets are Turned On

• Turns-O All Power, in the Event of a Power Surge

• 15A Tripping Point

3Outlets

• Connects to an AC Input on Downstream Device(s)

• NEMA 5-15R Connector

• 125V AC / 15A

4Protection Present LED

• Illuminates Green, When the Surge Protection on

the Power Strip is Functioning Correctly

5Fault LED

• Illuminates Red When the Power Source that the

Power Strip is Connected to is Wired Incorrectly

6Line Ok LED

• Illuminates Green When the Power Source that

the Power Strip is Connected to is Wired Correctly

7

Key-Hole Mounting

Points (x4)

• Temporarily Mount the Power Strip to a Surface

3

3

7

1

4

56

Installation

Connecting the Power Strip to an AC Power Source and Downstream

AC Device(s)

1. Connect the Built-in Power Cable, on the Power Strip, to an Available AC Power

Source (NEMA 5-15R Outlet).

2. Connect the AC input, on the downstream device(s), to an available Outlet, on the

Power Strip.

The Power Strip is now connected to an AC power source and Downstream device(s).

4N515S8-POWER-STRIP

6N515S8-POWER-STRIP

8N515S12-POWER-STRIP

This Quick-Start Guide provides setup information for the following StarTech.com Products:

*4N515S8-POWER-STRIP Model Shown

7

6.4” (162.7mm)

8.0” (162.7mm)

9.6” (242.7mm)

6.4” (162.7mm)

6.4” (162.7mm)

6.4” (162.7mm)

Product specificaties