StarTech.com 11050-PC-SERIAL-CARD Handleiding

Bekijk gratis de handleiding van StarTech.com 11050-PC-SERIAL-CARD (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over StarTech.com 11050-PC-SERIAL-CARD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 24, 2022

Product Diagram (11050-PC-SERIAL-CARD)

Port/LED/

Connector

Function

1Bracket• Used to secure the card on the Host Computer

2Activity LEDs

• Receive and transmit LEDs illuminate green when

there’s activity

3Serial Port DB-9• Connect Serial Peripheral Devices

4J2 Jumpers

• Used to or power output. The EnableDisablePin 9

default position is . Disable

5

J5 Power

Connector

• Optional: connect the Host Computer Power Supply

(4 Pin SP4/Floppy power connector) to Provide Power

over PIN 9

6

J3 Jumper

• Optional: used to change the voltage output of Pin 9

• PCI12V12V draws power from the PCIe slot. Outputs

• AUX12V J5 Power Connector. draws power from the

Outputs 12V

• AUX5V J5 Power Connector. draws power from the

Outputs 5V

7

PCIe 2.0 p1-x1

Connector

• Insert into a on thePCI Express Slot Host Computer

1-Port PCI Express Serial Card with COM Port Activity LEDs - 16C1050 UART

Package Contents

• Serial Parallel PCI Express Card x1

• Low-Prole Bracket x1

• Quick-Star Guide x1

Requirements

For the latest requirements, please visit www.startech.com/11050-PC-SERIAL-CARD

• Computer with an available PCI Express Slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

PCI Express Cards can be severely damaged by static electricity. Ensure that you

are properly grounded before you open your or touch the Computer CasePCI

Express CardAnti-Static Strap . You should wear an when you install any computer

component. If an isn’t available, discharge any built-up static Anti-Static Strap

electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and don’t touch the gold connectors.PCI Express Card

1. Turn o your and any that are connected to it (for Computer Peripheral Devices

example, , , .).PrintersExternal Hard Drivesetc

2. Unplug the from the back of your .Power Cable Computer

3. Disconnect any that are connected to your .Peripheral Devices Computer

4. Remove the from your . Consult the documentation that Cover Computer Case

came with your for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate

from the back of your . Consult the documentation that came with Computer Case

your for details about doing this safely. This card works in PCI Express x1, Computer

x4, x8, or p1-x16 slots.

6. Gently insert the into the open and fasten the PCI Express CardPCI Express Slot

BracketComputer Case to the back of the .

Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole

Desktop SystemFull-, it may be necessary to replace the pre-installed standard

Height Bracket Low-Prole Bracketwith the included .

5

7

1

2

6

4

3

Product specificaties