Speco Technologies VLT7 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies VLT7 (9 pagina's) in de categorie Videocamera. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
VLB5 / 7V B V V VL 6/ LD5/ LD6M/ LT
U e us r Man al
Warnings
■ If the product does not work properly, please contact the dealer or where the product was purchased. Speco
Technologies is not responsible for any problems caused by improper operation or repair.
■ Do not expose the unit to heavy stress, violent vibration or long-term exposure to water and humidity during
transportation, storage, and/or installation.
■ Do not install near sources of heat.
■ Only install the product in environments inside the specification operating temperature and humidity range.
■ Do not install the camera near power lines, radar equipment or other electromagnetic radiation.
■ Do not block any ventilation openings if any.
■ Use all the weatherproofing hardware requirement to minimize weather intrusion.
sensitivity, low noise and distortion and supports HD video transmission with the common coaxial cable,
ensuring the requirement of the HD monitoring in the traditional surveillance system.
This camera series is the latest technology and advanced circuit design, which features high definition and
Introduction
High Resolution
Adopt high performance sensor, providing high definition and clear image.
High Transmission Performance
Real time transmission with high speed and long distance- .
DNR
Reduce noise from brightness and color signal .
OSD
Access the camera settings which can be clearly displayed through the main menu.
White Balance
Adjust the color temperature according to the environment automatically.
ICR Auto Switch
The filter will filter infrared light during the daytime and change to normal at night to
ensure a high sensitivity and clear image .
AGC
Adjust the gain of amplifier, enabling the camera to output the standard video signal in different
lighting condition.
Wide Dynamic Range (WDR)
When there are both very bright and very dark areas simultaneously in the field of view, this function
will balance the brightness level and provide clear images.
1
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: F our video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng e nou gh to wit hst and t hree ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
Mounting for VLB5/VLB6
1. Drill the screw holes and the cable hole on the wall according to the drill template.
VLB6
48mm
48mm 4.5
VLB5
4.6
48mm
48mm


Product specificaties

Merk: Speco Technologies
Categorie: Videocamera
Model: VLT7

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies VLT7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Videocamera Speco Technologies

Handleiding Videocamera

Nieuwste handleidingen voor Videocamera