Speco Technologies O8SVT1 Handleiding
Bekijk gratis de handleiding van Speco Technologies O8SVT1 (97 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over Speco Technologies O8SVT1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/97

1
IP Camera User Manual
User Manual
SPECO SILVER SERIES
8MP IP Cameras
O8SD1/O8SB1/O8ST1/O8ST1M/O8SB1M/O8SD1M/O8SVT1/
O8SLB1/O8SLT1/O8SLT1M/O8SLB1M
Please read this manual carefully before operating the unit and keep it for further reference

2
IP Camera User Manual
Important Safeguards and Warnings
1. Electrical safety
• All installation and operation here should conform to local electrical safety codes.
• Use a certified/listed 12VDC Class 2 power supply only.
• Please note: Do not connect two power supplying sources to the device at the same time; it may
result in device damage! The product must be grounded to reduce the risk of electric shock.
• Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
• Device should not be subject to heavy stress, heavy vibration, or exposure to water during
transportation, storage, and installation.
• This product should be installed in a cool, dry place away from direct sunlight and heat sources.
• Do not install the product in extreme temperature conditions.
• Do not expose the camera to electromagnetic radiation or it may result in CMOS sensor failure.
• Do not block any ventilation openings.
• Do not allow water and liquid intrusion into the camera.
3. Operation and Daily Maintenance
• Please shut down the device and then unplug the power cable before you begin any maintenance work.
• Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens
surface.
• Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a
small quantity of neutral detergent. Finally use the dry cloth to clean the device.
• Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning
(such as using cloth) may result in poor IR functionality and/or IR reflection.
• The grounding holes of the product are recommended to be grounded to further enhance the reliability
of the camera.
• Dome cover is an optical device, please don’t touch or wipe cover surface directly during installation
and use, please refer to the following methods if dirt is found:
• Stained with dirt - Use oil-free soft brush or hair dryer to remove it gently.
• Stained with grease or fingerprint - Use oil-free cotton cloth or paper soaked with alcohol or detergent
to wipe from the lens center outward. Change the cloth and wipe several times if it is not clean enough.
Product specificaties
Merk: | Speco Technologies |
Categorie: | Bewakingscamera |
Model: | O8SVT1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Speco Technologies O8SVT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewakingscamera Speco Technologies
11 Maart 2025
11 Maart 2025
27 Mei 2024
6 Juli 2023
1 Juli 2023
30 Juni 2023
27 Juni 2023
26 Juni 2023
25 Juni 2023
Handleiding Bewakingscamera
- Alula
- Ecobee
- INSTAR
- Genius
- NetMedia
- Advantech
- Edimax
- Foscam
- Provision ISR
- First Alert
- Luis Energy
- EVOLVEO
- GeoVision
- Mitsubishi
- Jung
Nieuwste handleidingen voor Bewakingscamera
7 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025