Speco Technologies H8T7M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies H8T7M (8 pagina's) in de categorie Videocamera. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
H8D7M/H8B7M/H8T7M
Warnings
Speco Tech nologies is not respons ible for any problems caused by improper operation or repair.
All in stallation an d operation here should conform to local electrical safety codes.
Mak e sure the po wer supp ly v oltage is correct b efore u sing the camera.
Do not drop the camera or su bject it to physical shock.
Do not use th e device bey ond sp ecified voltage range.
Do not place the camera in extremely hot, cold (the operating temperature shall be (-22˚F~122˚F), dusty or
damp locations, and do not expose it to high electromagnetic radiation.
To avo id heat accumulation, good ventilation is required for op erating environment.
If th e product does not work properly, please contact the dealer or wh ere the product was purchased.
Keep away from liquid while in use.
sensitiv ity, low noise and distortion and supp orts HD video transmission with the common coaxial cable,
ensu rin g the requirement of the HD monitoring in the traditional surveillance system.
This camera series is th e latest techno logy and advanced circuit design , which features high definition and
Introduction
Hig h Reso lu tion
Adopt high performance sensor, providin g hig h d efinition and clear image.
Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
Hig h L ig ht Compensation HLC ( )
Mask and compensation the high ligh t area.
DNR
Reduce noise from brightness and colo r sign al .
OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
White Balance
Adju st the co lor temperature according to the en vironmen t automatically.
ICR Auto Switch
The filter will filter infrared light during th e day time and ch ange to normal at night to
ensu re a high sensitivity and clear image .
AGC
Adju st th e gain of amplifier, enabling th e camera to outpu t the stan dard video s ig nal in different
ligh ting condition.
1
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: F our video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng enou gh to w it hst and t hr ee ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
►Mounting for H8B7M
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
4.6
48mm
48mm


Product specificaties

Merk: Speco Technologies
Categorie: Videocamera
Model: H8T7M

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies H8T7M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Videocamera Speco Technologies

Handleiding Videocamera

Nieuwste handleidingen voor Videocamera