Soundskins SSK-ELECTRA14 Handleiding
Pagina's 3 Engels Niet gecategoriseerd
Bekijk de handleiding van Soundskins SSK-ELECTRA14 gratis online of download de PDF. 74 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
14+ Harley Davidson Saddlebag Kit Installation Instructions
This kit ts both standard factory bags, extended bags, as well as aftermarket stretched bags.
The kit is designed to dramatically lower the resonant characteristics of saddlebags which makes
them much better speaker enclosures and reduces unwanted noises. It kit can be used alone, but
it is intended to be covered by a custom bag liner. Bag liners are common and readily available
from many sources. Multi sectioned liner should be used so that the thickness of the sound
deadener can be accounted for. Pre-molded bag liners may have tting issues and may need to be
modied.
Plan ahead for other items installed in the bags. If you have speakers or ampliers mounted inside
your bags, you will need to account for them when installing this kit.
For example: American Hard Bag amplier mounting racks have a plastic puck that needs to be
epoxied into the bag prior to installation of this kit. The panels can then be cut to t around the
amp rack mounting puck. American Hard Bag 8 inch and 10 inch woofer kits work well with this kit,
but you must fully install the woofer kit before installing the SoundSkins kit into the bags. Do not
install the speaker grills or the foam gasket that comes in your American hard bag woofer kit.
Once you have installed the woofer kit and tted the woofers (less the grills), unscrew and remove
both the woofers and the woofer mount as a single item. Then, install the kit and cut around the
speaker grill holes in the bag. Next, use the double sided speaker grill mounting tape to mount the
speaker grills to the woofer mount. Then, re-install the woofer kit with woofers into the bag. The
SoundSkins material will act as a sealing gasket between the woofer mount and the bag.
Thoroughly clean and degrease the inside of both bags. SoundSkins material has a self adhesive
backing that will permanently bond to the bag once in place, so be careful when you position
the material, as it may be dicult to get it back o once in place. Generally, the material can be
repositioned if it is not pressed in place. Care must be taken not to tear the material when
repositioning.
Product specificaties
| Merk: | Soundskins |
| Categorie: | Niet gecategoriseerd |
| Model: | SSK-ELECTRA14 |
Heb je hulp nodig?
Als je hulp nodig hebt met Soundskins SSK-ELECTRA14 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Soundskins
Soundskins SSK-WJLTRUNK Handleiding Soundskins SSK-CRSTRK4DR Handleiding Soundskins Pro SSPRO-1 Handleiding Soundskins SSK-RDKNG14 Handleiding Soundskins SSK-CAMRY4DR Handleiding Soundskins SSK-F1504DRV3 Handleiding Soundskins SSK-BRONCO4DR Handleiding Soundskins SSK-RAP4DRV2 Handleiding
Populair in Niet gecategoriseerd
Soundskins SSK-BRONCO Handleiding Soundskins Rings v3 SSK-RINGS Handleiding Soundskins SSK-CIVIC4DR Handleiding