Sony SNC-WR632 Handleiding

Bekijk gratis de handleiding van Sony SNC-WR632 (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 31 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Sony SNC-WR632 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

About the Manuals

Installation Manual (this document)

This Installation Manual describes the names and functions of parts and controls

of the Network Camera, gives connection examples and explains how to set up

the camera. Be sure to read the Installation Manual before operating.

SNC easy IP setup Guide (stored in the CD-ROM)

User’s Guide/Application Guide (Web)

The User’s Guide describes how to set up the camera and how to control the

camera via a Web browser.

After installing and connecting the camera correctly, operate referring to this

User’s Guide.

Using the software

The supplied CD-ROM includes the setup program for assigning an IP address.

The information for how to set up an IP address is also included in the disc in PDF

format.

User’s Guide and Application Guide can be downloaded from the disc, or the

following URL:

http://www.sony.net/ipela/snc

Using the CD-ROM manual

The manual can be read on a computer with Adobe Reader installed.

You can download Adobe Reader free from the Adobe website.

1Open the index.html file in the CD-ROM.

2Select and click on the manual that you want to read.

Note

If you have lost or damaged the CD-ROM, you can purchase a new one from your

Sony dealer or Sony service counter.

Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated in the

United States and/or other countries.

Assigning the IP address

Assign the IP address using the setup program in the supplied CD-ROM.

For details on how to set up the IP address, see SNC easy IP Setup Guide.

Location and Function of Part

Camera (Front) 

Top sunshade

Dome cover

Sunshade

Top Unit (Bottom) 

Reset switch

This switch returns the setting of the device to the factory default setting.

1. Move the INIT switch in the direction indicated by and connect with 

camera.

2. Turn on power and wait 1 minute. After the initialization is completed, the

camera starts.

3. Check that the camera has started and turn off the power to remove camera.

4. Move the INIT switch back to its original position.

Notes

Resetting the device removes all customized settings. It is recommended ˎ

that users save the settings as necessary. Instructions on how to save

settings are available in the User’s Guide.

The reset switch should always be returned to its original position. ˎ

Otherwise your device is reset to its factory default setting whenever it is

turned on.

Camera connection terminal

Connect to the camera connection terminal of the camera.

AC 24 V (power input) terminal

Use the supplied AC connector to connect to the 24 V AC power supply system.

Pin No.

Pin name

AC24V

1AC24V+

2Frame Ground

3AC 24V-

Note

Be sure to connect the Frame Ground to the specified terminal.

I/O (Input/Output) port

Provides four sensor inputs and two alarm outputs.

1

7

8

14

Pin

No.

Pin name

Color

RS422/

RS485(Full)

RS485

(Half)

8

9

10

11

12

13Alarm Out 2-

Alarm Out 2+

14

GND

Yellow

Orange

Red

Brown

Black

Purple

Purple

Tx-/Rx-

Tx+/Rx+

Rx-

Rx+

Tx-

Tx+

Pin nameColor

GND

Blue

Blue

Yellow

Orange

Red

Brown

Black

Alarm Out 1-

Alarm Out 1+

Sensor in 4

Sensor in 3

Sensor in 2

Sensor in 1

Pin

No.

1

2

3

4

5

6

7

Note

For details about functions and settings, see the user’s guide.

 LAN (network) port (RJ-45)

Connect to a 10BASE-T or 100BASE-TX network using a network cable (UTP,

category 5).

Harness holder

Attach the supplied band mount.

(video output) terminal

Outputs a composite video signal. Use the supplied monitor cable to connect to

the camera.

(microphone input) terminal (minijack, monaural)

Connect a commercially available microphone.

(line output) terminal (minijack, monaural)

Connect to a commercially available speaker with a built-in amplifier.

Camera (Top) 

Camera connection terminal

Connect to the camera connection terminal of the top unit.

Rating Label

This label shows the name of device and its electric rating.

Built-in wire rope

The wire rope is used for fall-prevention.

SD memory card slot

This slot is used for an optional SD memory card.

Images captured by the camera can be stored into an inserted memory card.

Be sure that the printed side of a memory card and the product specifications

label face in the same direction, and then insert the card firmly into the slot. ()a

This unit only supports memory card formats compatible with the SD/SDHC

standards.

Note

For information about Sony-approved SD memory cards, contact your Sony

dealer.

Connection

Connecting to the Network

Connect the LAN port of the camera unit to a router or hub in the network using

the network cable (not supplied).

Connecting the Power Source

The following power sources can be used.

HPoE+ 4 line power-supply ˎ

24 V AC ˎ

Notes

Do not turn o the camera immediately after turning it on. Wait for at least ve ˎ

minutes before turning o the camera.

If power is supplied by an HPoE+ system, do not install the wiring for 24 V AC. ˎ

Perform grounding of the frame ground only.

HPoE+ 4 line power-supply

The power is supplied by using PD9501G of PowerDsine or a similar power supply

device via a network cable.

For details, refer the manual of the power supply device.

Note

If the power is supplied by HPoE+, the integrated heater is not available. Use the

camera in the activation temperature range of 0 °C to 50 °C (32 °F to 122 °F).

Connecting to a 24 V AC power source supply

Connect the 24 V AC power supply system to the power input terminal of the

camera. The AC power cable is not supplied.

Use a 24 V AC power source isolated commercial power supply. ˎ

The usable voltage range is as follows: ˎ

24 V AC: 21.6 to 26.4 V

Use a UL cable (VW-1 style 10368) for 24 V AC connection. ˎ

Recommended power cable

24 V AC

Cable(AWG)#22#20#18#16

Maximum cable length

(m (feet))

5 (16.4)8 (26.2)15 (49.2)21 (68.9)

Connecting the I/O Cable

Wiring diagram for sensor input

Mechanical switch/open collector output device

Camera inside

3.3 V

2.2 kohms

GND

Mechanical

switch

Open collector

output device

Outside

or

GNDGND

10 kohms

10 kohms

10 kohms

GND

Sensor Input 1, 2, 3, 4

Wiring diagram for alarm output

Camera inside

Alarm Output +

Magnet relay

24 V AC

24 V DC,

1 A or less

Alarm Output –

Outside

24 V DC

Circuit example

GND

R

(continued on the reverse side)

4-474-023-(1)12

© 2013 Sony Corporation

Printed in China

Network Camera

SNC-WR632/WR602

Installation Manual

Before operating the unit, please read this manual thoroughly and

retain it for future reference.

A







B















C









Printed side

Product specificaties