Sony MCC-500MD Handleiding

Sony Niet gecategoriseerd MCC-500MD

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony MCC-500MD (59 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/59

HD Video Camera

Instructions for Use

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

MCC-500MD

4-529-125-18 (1)

2022-08

Indications for Use/Intended

Use

The Sony MCC-500MD is intended to

acquire HD color video images from

medical microscopes and other compatible

medical imaging systems.

The acquired video image can be displayed

on a compatible monitor for visualization as

a secondary view to the microscope

binoculars.

The MCC-500MD is a high-definition

medical grade camera for use primarily with

medical microscope procedures including

Neurology and Ophthalmology.

Notes

• Output images from this equipment

cannot be used for diagnostic use.

• This equipment is for medical

professionals.

• This equipment is intended for use in

medical environments, such as hospital

operating rooms and hospital

examination rooms.

To reduce the risk of fire or

electric shock, do not expose this

equipment to rain or moisture.

To avoid electrical shock, do not

open the cabinet. Refer servicing

to qualified personnel only.

No modification of this

equipment is allowed.

WARNING

To avoid the risk of electric

shock, this equipment must only

be connected to a supply mains

with protective earth.

WARNING

This unit has no power switch.

To disconnect the main power, unplug the

power plug.

When installing the unit, incorporate a

readily accessible disconnect device in the

fixed wiring, or connect the power plug to

an easily accessible socket-outlet near the

unit.

Do not position the ME equipment where it

is difficult to unplug the power plug.

If a fault should occur during operation of

the unit, operate the disconnect device to

switch the power supply off, or disconnect

the power plug.

WARNING

Symbols on the product

Consult the

instructions for use

Follow the directions in the

instructions for use for parts

of the unit on which this

symbol appears.

This symbol indicates the

manufacturer, and appears

next to the manufacturer’s

name and address.

This symbol indicates the

Importer, and appears next to

the Importer’s name and

registered office address.

This symbol indicates the

European Community

representative, and appears

next to the European

Community representative’s

name and address.

This symbol indicates the UK

Responsible Person, and

appears next to the UK

Responsible Person’s name

and address.

This symbol indicates the

Swiss authorized

representative, and appears

next to the Swiss authorized

representative’s name and

address.

For customers in the U.S.A.

This equipment has been tested and found to

comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case the

user will be required to correct the

interference at his own expense.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

All interface cables used to connect

peripherals must be shielded in order to

comply with the limits for a digital device

pursuant to Subpart B of part 15 of FCC

Rules.

For customers in the U.S.A.

Caution

Federal law (United States of America)

restricts this device to sale by or on the order

of a licensed healthcare practitioner.

For customers in Canada

This unit has been certified according to

Standard CAN/CSA-C22.2 No.60601-1.

For customers in the U.S.A

and Canada

When you use this product connected to

240 V single phase, be sure to connect this

product to a center tapped circuit.

This symbol indicates the

medical device in the

European Community.

This symbol indicates the date

of manufacture.

This symbol indicates the

serial number.

This symbol indicates the

Unique Device Identifier

(UDI), and appears next to the

bar code representation of the

Unique Device Identification.

This symbol indicates the

equipotential terminal which

brings the various parts of a

system to the same potential.

Storage and transport

temperature

This symbol indicates the

acceptable temperature range

for storage and transport

environments.

Storage and transport

humidity

This symbol indicates the

acceptable humidity range for

storage and transport

environments.

Storage and transport

pressure

This symbol indicates the

acceptable atmospheric

pressure range for storage and

transport environments.

Product specificaties

Merk:	Sony
Categorie:	Niet gecategoriseerd
Model:	MCC-500MD
Kleur van het product:	Wit
Stroom:	0.27 - 0.18 A
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	1920 x 1080 Pixels
Totaal aantal megapixels:	2.07 MP
Inclusief AC-adapter:	Ja
Aantal HDMI-poorten:	1
Volledige HD:	Ja
Omvang optische sensor:	1/2.9 "
Type beeldsensor:	CMOS
Witbalans:	ATW, Halogen
Temperatuur bij opslag:	-20 - 60 °C
RS-232C-poorten:	1
Luchtvochtigheid bij opslag:	20 - 90 procent
Op afstand bedienbaar:	Ja
Snelste camera sluiter snelheid:	1/10000 s
Langzaamste camera sluiter snelheid:	- s
BNC output ports:	2
S-Video-uitgang:	Ja
Lensdop inbegrepen:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Statief inbegrepen:	Ja
Lens mount interface:	C-bevestiging
Camera interface:	BNC