Sony DMX-WL1 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Sony DMX-WL1 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 125 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
3-877-083-11(1)
© 2008 Sony Corporation
Reference Guide
The Reference Guide contains troubleshooting, specifications, and safety
related information.
DMX-WL1
2
WARNING
To reduce the risk of fire or electric shock, do
not expose the equipment to rain or moisture.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
The equipment shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the
equipment.
Do not install this equipment in a confined
space, such as a bookshelf or similar unit.
CAUTION
To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
NOTIFICATION
This equipment has been tested and found to
comply with the limits for a Class B digital
equipment, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
sReorient or relocate the receiving antenna.
sIncrease the separation between the
equipment and receiver.
sConnect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
sConsult the dealer or an experienced radio/
TV technician for help.
For Customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Trademark Information
“BRAVIA” and are trademarks of
Sony Corporation.
PLAYSTATION is a registered trademark and
“PS3” is a trademark of Sony Computer
Entertainment Inc.
This equipment incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing,
LLC.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision corporation, and is
intended for home and other limited consumer
uses only unless otherwise authorized by
Macrovision. Reverse engineering or
disassembly is prohibited.
Owner’s Record
The model, serial numbers and the date of
manufacture are written on the rating labels.
They are located at the bottom of the
transmitter and the receiver.
Record these numbers in the spaces
provided below. Refer to them whenever
you call upon your Sony dealer regarding
this product.
Transmitter Receiver
Model No. DMX-WL1T DMX-WL1R
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
Pursuant to FCC regulations, you are
cautioned that any changes or modifications
not expressly approved in this manual could
void your authority to operate this
equipment.
NOTE ON AC POWER
ADAPTER (EADP-16ABA)
Warning
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on
the apparatus.
Do not install this equipment in a confined
space, such as a bookshelf or similar unit.
sPlease ensure that the wall outlet is
installed near the equipment and shall be
easily accessible.
sBe sure to use the supplied AC power
adapter and power cord.
sDo not use any other AC power adapter. It
may cause a malfunction.
sConnect the AC power adapter to an
easily accessible wall outlet.
sDo not coil
the AC
power cord
around the
AC power
adapter. The
core wire
may be cut
and/or it may
cause a
malfunction of the equipment.
sDo not touch the AC power adapter with
wet hands.
sIf you notice an abnormality in the AC
power adapter, disconnect it from the wall
outlet immediately.
sThe set is not disconnected from the AC
power source as long as it is connected to
the wall outlet, even if the set itself has
been turned off.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
Important
Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other equipment (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
equipment.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
equipment. When a cart is used, use caution when
moving the cart/equipment combination to avoid
injury from tip-over.
13) Unplug this equipment during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the equipment has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the equipment, the equipment has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
USE
AC power cord and other cables
If you damage the AC power cord or other cables, it may result in a fire
or an electric shock. If the AC power cord or any other cables is damaged,
stop using it at once and contact the Sony service center.
sDo not place the equipment where the power cord and cables are
subject to wear or abuse.
sDo not pinch, bend, or twist the cord excessively. The core lines may
be bared and cut, and cause a short-circuit, resulting in a fire or an
electric shock.
sDo not convert or damage the power cord and cables.
sDo not allow anything to rest on or roll over the power cord and
cables.
sDo not pull the power cord and cables.
sDo not move the equipment with the power cord and cables plugged
in.
sKeep the power cord and cables away from heat sources.
sBe sure to grasp the plug when disconnecting the power cord and
cables.
sDo not place the equipment in an area where the cables may become
entangled and catch on your feet or hands.
Wall outlet
Do not use a poor fitting outlet. Insert the plug fully into
the outlet. If it is loose, it may cause arcing and result in
a fire. Contact your electrician to have the outlet
changed.
Cable wiring
For your safety, unplug the AC power cord when wiring cables. Take care
not to catch your feet on the cables. It may damage the equipment.
Electric shock
Do not touch the AC power cord or the equipment
with a wet hand. If you plug/unplug the AC power
cord from the equipment with a wet hand, it may
cause electric shock.
Lightning
For added protection for this equipment during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from
the wall outlet. This will prevent damage to the equipment due to
lightning and power line surges.
Small accessories
Keep small accessories out of children’s reach.
Use only the specified accessories with this product.
CLEANING
sClean the AC power plug regularly.
sIf the plug is covered with dust and it picks up
moisture, its insulation may deteriorate and
result in a fire.
sUnplug the AC power cord when cleaning this
equipment. If not, it may result in electric
shock.
sClean the casing of the equipment with a dry
soft cloth. Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water. Never use
strong solvents such as thinner or benzine for cleaning.
sIf using a chemically pretreated cloth, please follow the instruction
provided on the package.
sDust the ventilation holes with a dry cloth.
3
(continued)


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: DMX-WL1

Heb je hulp nodig?

Als je hulp nodig hebt met Sony DMX-WL1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sony

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd