Sony BKPF-L641 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sony BKPF-L641 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Sony Corporation
NTSC/PAL TO 4:2:2 BOARD
Printed in Japan
BKPF-L641 (WW) 2009.04 13
3-206-067- (1)03 2001
BKPF-L641
INSTALLATION GUIDE
警告
Precautions
If this board is installed incorrectly, personal injury or
damage to peripheral items may occur due to re,
shock, or other accidental circumstances. To avoid
such risks, installation should be performed by trained
service technicians.
To technician installing board
Please refer to the Manual supplied with the PFV-L-
series unit for installation instructions.
Introduction
This product is an optional board designed to be
installed in a PFV-L-series Interface Unit. The board
converts analog NTSC/PAL composite video signals
to 525/625-line 4:2:2 component serial digital video
signals. It has a frame synchronizer function so that
the converted signals are output in sync with the
reference video signal.
Specifications
Power requirements +5 V DC, 1.4 A (supplied from
the PFV-L-series unit)
Dimensions (w/h) Main board: 267 × 77 mm
(10 3/4 3 1/8 inches)×
Connector panel: 33 85 mm×
(1 5/16 3 3/8 inches)×
Mass Main board: 160 g (6 oz)
Connector panel: 100 g (4 oz)
Supplied accessories Installation Guide (1)
Installation Manual (1)
Slot Number Label (1)
Design and specications are subject to change
without notice.
電気製品安全のたの注意事項
火災や人身事故
ご使用PFV-L
付属のルの「安全のために」お読
本機て装着す火災感電そのの事故
周辺の物品に損
危険ため装着はサ
ご依頼い。
本機を装着する技術者へ
装着のかたPFV-Lに付属のマニアルご覧
概要
本機PFV-Lに装着て使用す
板です。NTSC/PAL
525/6254:2:2ポービデオ信号
変換ザー
ビデ信号ビデオ
同期せて出力すす。
仕様
電源 +5VDC1.4APFV-L供給)
最大外形寸法 メ267×77mm(幅/高
33×85mm(幅/高
質量 メ170g
100g
付属品 イ(1)
(1)
番号ベル(1)
仕様び外観は良のめ予更す
ご了承
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modications not
expressly approved in this manual could void your authority
to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les clients au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe
This product with the CE marking complies with the EMC
Directive issued by the Commission of the European
Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environments: E1 (residential), E2
(commercial and light industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
Pour les clients en Europe
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) émise par la
Commission de la Communauté européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes :
• EN55103-1 : Interférences électromagnétiques (émission)
• EN55103-2 : Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les environnements
électromagnétiques suivants : E1 (résidentiel), E2
(commercial et industrie légère), E3 (urbain extérieur) et E4
(environnement EMC contrôlé, ex. studio de télévision).
Für Kunden in Europa
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Richtlinie der EG-Kommission.
Angewandte Normen:
• EN55103-1: Elektromagnetische Verträglichkeit
(Störaussendung)
• EN55103-2: Elektromagnetische Verträglichkeit
(Störfestigkeit)
Für die folgenden elektromagnetischen Umgebungen: E1
(Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).
For the customers in Europe
The manufacturer of this product is Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product safety
is Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Germany.
Pour les clients en Europe
Le fabricant de ce produit est Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japon.
Le représentant autorisé pour EMC et la sécurité des
produits est Sony Deutschland GmbH, Hedelnger Strasse
61, 70327 Stuttgart, Allemagne.
Für Kunden in Europa
Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
Der autorisierte Repräsentant für EMV und Produktsicherheit
ist Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Deutschland.


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: BKPF-L641

Heb je hulp nodig?

Als je hulp nodig hebt met Sony BKPF-L641 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sony

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd