Sonic Alert SA201 Handleiding

Bekijk gratis de handleiding van Sonic Alert SA201 (2 pagina’s), behorend tot de categorie Beveiliging. Deze gids werd als nuttig beoordeeld door 107 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Sonic Alert SA201 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DELUXE REMOTE RECEIVER

MODEL SA201

OPERATION

The Deluxe Remote Receiver SA201, will alert you by flashing

a light when a signal is transmitted from a Sonic Alert

Transmitter (Telephone Ring Signalers, Baby Cry Signaler or

Doorbell Signaler). A signal from one or all of the transmitters

will be received by the SA201 and in turn will flash a light

which is plugged into the SA201 cord. The SA201 will have a

different sequence of flashing depending of which transmitter is

being activated. The SA201 can also be used for room lighting

by pushing the button on the SA201. The green light will

indicate if the lamp is in the “on” or “off” position.

INSTALLATION

1. Plug a lamp into the outlet on the cord of the SA201 as

shown in the diagram on the reverse side. Make sure the

switch on the lamp is in the "ON" position or the lamp will

not flash when the telephone rings.

2. Plug the SA201 Remote Receiver into any standard

electrical outlet.

3. From this point on, only use the button on the SA201 to turn

the lamp on and off. Pressing the button once will turn the

lamp ON. Pressing the button again will turn the lamp OFF. A

green light under the button will come on whenever the lamp

should be on. If the green light is on and the lamp is not on, the

lamp is either turned off or the light bulb is burned out. If you

turn the switch on the lamp to the “OFF” position, the lamp

will not flash when the SA201 is activated.

4. If the lamp plugged into the SA201 is “on,” it will flash “off”

when the telephone rings. If the lamp is in the “off” position,

it will flash "on" when activated.

DELUXE REMOTE RECEIVER

MODEL SA201

OPERATION

The Deluxe Remote Receiver SA201, will alert you by flashing

a light when a signal is transmitted from a Sonic Alert

Transmitter (Telephone Ring Signalers, Baby Cry Signaler or

Doorbell Signaler). A signal from one or all of the transmitters

will be received by the SA201 and in turn will flash a light

which is plugged into the SA201 cord. The SA201 will have a

different sequence of flashing depending of which transmitter is

being activated. The SA201 can also be used for room lighting

by pushing the button on the SA201. The green light will

indicate if the lamp is in the on or off position.

INSTALLATION

1. Plug a lamp into the outlet on the cord of the SA201 as

shown in the diagram on the reverse side. Make sure the

switch on the lamp is in the "ON" position or the lamp will

not flash when the telephone rings.

2. Plug the SA201 Remote Receiver into any standard

electrical outlet.

3. From this point on, only use the button on the SA201 to turn

the lamp on and off. Pressing the button once will turn the

lamp ON. Pressing the button again will turn the lamp OFF. A

green light under the button will come on whenever the lamp

should be on. If the green light is on and the lamp is not on, the

lamp is either turned off or the light bulb is burned out. If you

turn the switch on the lamp to the “OFF” position, the lamp

will not flash when the SA201 is activated.

4. If the lamp plugged into the SA201 is “on,” it will flash “off”

when the telephone rings. If the lamp is in the “off” position,

it will flash "on" when activated.

Product specificaties