SolidDrive SD-1Desktop Handleiding

Bekijk gratis de handleiding van SolidDrive SD-1Desktop (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.2 sterren uit 3 reviews. Heb je een vraag over SolidDrive SD-1Desktop of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Install Instructions For:

SD1 Desktop Kit-250.

© 2014 MSE Audio. All rights reseved.r PN INS-SD-250 Rev01.27.12

Warning

SolidDriveproductsmustbeinstalledbyofessionalaudioinstaller/contracto a pr r. Forsafety

and for optimum audio performance, installer must follow all directions issued by SolidDrive.

SD1 DESKTOP KIT-250

Avis

Les produits SolidDrive doit être installé par un installateur professionnel audio/contractuer.

Pour plus de sûreté et pour des performances audio optimales, l'installateur doit suivre toutes

les instructions émises par SolidDrive.

GETTING STARTED WITH SOLIDDRIVE

Included with the SolidDrive SD1 Desktop Kit-250 for installation

on any horizontal surface:

One (1) SolidDrive SD1 Desktop, SD-250 mini amplier with

built-in EQ curves, 15V DC power supply, all necessary cabling,

instructions and durable, padded case.

The SolidDrive SD1 Desktop is connected to the SD-250 amp

from the supplied “push-on”connector to the right speaker output

on SD-250. The special silicone rubber pad “grips” any non-po-

rous surface.

The portable SolidDrive SD1 Desktop Kit-250 is to be used with

a laptop computer, portable CD player, or other sound source.

The SolidDrive SD1 Desktop utilizes patented technology to

convey an audio signal into a table or countertop, evenly deliver-

ing sound from the entire surface.

SETUP

1. Connect the power supply to the SD-250 amplier.

2. Plug the power lead from the 15V DC power supply into the DC

IN of the amplier. Connect the SolidDrive with “push-on” connec-

tor to the speaker output of the SD-250. If one drive is used move

jumper setting to MONO.

3. Connect audio source (MP3 player, computer, etc.) to stereo

mini input. Make sure INPUT SELECTOR is set to STEREO MINI.

4. If outside the USA, use appropriate outlet adapter and plug

into wall outlet.

5. Adjust volume on computer or other audio source to desired

level. The audio output signal level will vary from computer to

computer. You can use the volume control on the SD-250.

6. Adjust the proper electronic EQ on the SD-250 [WOOD,

DRYWALL (gypsum), GLASS, or FLAT] for the surface type the

SolidDrive will be used on.

Product specificaties