Snow Joe ION100V-21SB-CT Handleiding

Snow Joe Sneeuwblazer ION100V-21SB-CT

Lees hieronder de 📖 handleiding in het Nederlandse voor Snow Joe ION100V-21SB-CT (68 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/68

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model iON100V-21SB-CT Form No. SJ-iON100V-21SB-CT-880E-MR3

CORDLESS SNOW BLOWER – TOOL ONLY

100-VOLT MAX* | 21-INCH | LED LIGHTS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol used in this m

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Also use safety footwear, snug-tting Use safety glasses –

clothing, protective gloves, hearing and head protection.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Always disengage the switch bar lever,

and disconnect the battery pack; wait for all movement to

stop before making any adjustments, inspecting, servicing,

changing accessories, cleaning the snow blower, or when

any other dangerous conditions present. Any such operation

should be performed after revolving parts inside the snow

blower stop completely. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, disconnect

the battery pack, and contact Snow Joe® + Sun Joe® customer

service center at 1-866-SNOWJOE (1-866-766-9563).

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts.

All guards and safety attachments must be installed

properly before using the unit. Shut o and disconnect the

battery pack(s) before touching any parts other than the

handles and switch.

For all Snow Blowers

• Do not use on graveled surfaces unless the snow blower is

adjusted for such a surface in accordance with the manual.

• Keep children away. All visitors should be kept a safe

distance from work area.

• Dress properly. Do not wear loose clothing or jewelry.

They can be caught in moving parts.

• Wear rubber boots when operating the snow blower.

• Operation of the snow blower in the hand-held position is

unsafe, except in accordance with the special instructions

for such use provided in the operator's manual.

• Avoid accidental starting – Make sure the safety button is

o and the switch bar lever is disengaged before inserting

the battery pack(s) into the unit. Do not transport the

snow blower with the safety button and the switch bar

lever engaged.

• Keep hands away from moving parts.

• Keep guards in place and in working order.

• Do not force the snow blower. Use the snow blower at

the rate for which it was designed to ensure optimal

performance and safe operation.

• Do not overreach. Keep proper footing and balance at

all times.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower and remove the battery pack(s).

ii) Inspect for damage.

iii) Repair any damage before restarting and operating

the snow blower.

For Walk-behind Snow

Blowers

This snow blower is capable of amputating hands and feet

and throwing objects. Failure to observe the following safety

instructions could result in serious injury.

Training

1. Read, understand and follow all instructions on the

machine and in the manual before operating this unit. Be

thoroughly familiar with the controls and the proper use of

the equipment. Know how to stop the unit and disengage

the controls quickly.

2. Never allow children to operate the equipment.

Never allow adults to operate the equipment without

proper instruction.

3. Keep the area of operation clear of all persons, particularly

small children.

4. Exercise caution to avoid slipping or falling. Especially

when operating the snow blower in reverse.

Preparation

1. Thoroughly inspect the area where the equipment is to be

used and remove all doormats, sleds, boards, wires, and

other foreign objects.

2. Do not operate the equipment without wearing adequate

winter garments. Avoid loose tting clothing that can get

caught in moving parts. Wear footwear that will improve

footing on slippery surfaces.

3. Never attempt to make any adjustment while the

motor is running, except when specically

recommended by manufacturer.

4. Always wear safety glasses or eye shields during

operation or while performing an adjustment or repair

to protect eyes from foreign objects that may be thrown

from the machine.

Operation

1. Do not put hands or feet near or under rotating parts.

Keep clear of the discharge opening at all times.

2. Exercise extreme caution when operating on or crossing

gravel drives, walks, or roads. Stay alert for hidden

hazards or trac.

3. After striking a foreign object, stop the motor, remove the

battery pack(s), thoroughly inspect the snow blower for

any damage, and repair the damage before restarting and

operating the snow blower.

4. If the unit start to vibrate abnormally, stop the motor and

check immediately for the cause. Vibration is generally a

warning of trouble.

5. Stop the motor whenever you leave the operating position,

before unclogging the auger/impeller housing or discharge

chute, and when making any repairs, adjustments or

inspection.

6. When cleaning, repairing, or inspecting the snow blower,

stop the motor and make sure the auger/impeller and all

moving parts have stopped.

7. Do not run the motor indoors. Except when starting the

motor and for transporting the snow blower in or out of

the building. Open the outside doors. Exhaust fumes

are dangerous.

8. Exercise extreme caution when operating on slopes.

9. Never operate the snow blower without proper guards and

other safety protective devices in place and working.

10. Never direct the discharge toward people or areas

where property damage can occur. Keep children and

others away.

11. Do not overload the machine at high transport speeds

on slippery surfaces. Look behind and use care when

operating in reverse.

12. Do not overload the machine capacity by attempting to

clear snow at too fast a rate.

13. Disengage the power to the auger/impeller when snow

blower is transported or not in use.

14. Use only attachment and accessories approved by the

manufacturer of the snow blower.

15. Never operate the snow blower without good visibility or

light. Always be sure of your footing, and keep a rm hold

on the handle. Walk; Never run.

16. Never touch a hot motor.

Clearing a Clogged Discharge Chute

mWARNING! Rotating blades can cause serious injury.

Never attempt to unclog or clean unit while auger is running.

Hand contact with the rotating auger/impeller inside the

discharge chute is the most common cause of injury

associated with snow blowers. Never use your hand to clean

out the discharge chute.

To clean the chute:

1. SHUT THE MOTOR OFF AND REMOVE THE BATTERY

PACK(S).

2. Wait 10 seconds to be sure the auger blades have

stopped completely.

3. Always use a clean-out tool, such as Snow Joe® universal

chute clean-out tool (Model SJCOT). Visit snowjoe.com

to purchase.

Maintenance and Storage

1. Check shear bolts and other bolts at frequent intervals

for proper tightness to be sure the equipment is in safe

working condition.

2. Always refer to the operator's manual for important details

if the snow blower is to be stored for an extended period.

3. Maintain or replace safety and instruction labels,

as necessary.

4. Run the machine a few minutes after plowing snow to

prevent freeze-up of the auger/impeller.

Battery + Charger

Safety Instructions

NOTE: This unit is a tool only. The battery and the charger

are not included. They must be purchased separately. The

iON100V-21SB-CT is compatible with the following batteries

(models iON100V-2.5AMP and iON100V-5AMP) and charger

(model iON100V-RCH). See page 20 for battery options and

specications, or visit snowjoe.com.

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the cordless snow blower and

cause it to malfunction, which can lead to serious personal

injury.

mCAUTION! To reduce the risk of injury, charge the

iON100V-2.5AMP battery pack or the iON100V-5AMP battery

pack only in their compatible charger (model iON100V-RCH,

sold separately). Other types of chargers present risk of re,

personal injury, and damage. Do not wire a battery pack to a

power supply plug or car cigarette lighter. Such misuse will

permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack(s) in rain, snow or in damp or wet locations.

Do not use the battery pack(s) or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack(s), which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the batteries is -4°F

(-20°C) to 113°F (45°C). Do not charge the battery pack(s)

outside in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger,

pull the plug, not the cord, from the receptacle to reduce

the risk of damage to the electrical plug and cord. Never

carry the charger by its cord or yank it by the cord to

disconnect it from the receptacle. Keep the cord away

from heat, oil and sharp edges. Make sure the cord will not

be stepped on, tripped over or subjected to damage or

stress when the charger is in use. Do not use the charger

with a damaged cord or plug. Replace a damaged charger

immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 18 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to remove

battery pack from unplugged chargers.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate the battery pack(s) –

Battery packs may explode, causing personal injury or

damage. Toxic fumes and materials are created when

battery packs are burned.

• Do not crush, drop or damage the battery pack(s) –

Do not use the battery r charger if they have pack(s) o

sustained a sharp blow, been dropped, run over or have

been damaged in any way (i.e. pierced with a nail, hit with a

hammer, stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are pack(s)

damaged, contact an authorized Snow Joe® +

Sun Joe® dealer or call the Snow Joe® + Sun Joe®

customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

Product specificaties

Merk:	Snow Joe
Categorie:	Sneeuwblazer
Model:	ION100V-21SB-CT

Heb je hulp nodig?

Als je hulp nodig hebt met Snow Joe ION100V-21SB-CT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer Snow Joe

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Snow Joe SJ618E Handleiding

3 Augustus 2023

Snow Joe 24V-SS10 Handleiding

16 Juni 2023

Snow Joe ION18SB-CT-RM Handleiding

16 Juni 2023

Snow Joe 323 Handleiding

12 Juni 2023

Snow Joe 24V-SS11-RM Handleiding

29 Mei 2023

Snow Joe SJ-SHLV20 Handleiding

26 Mei 2023

Snow Joe SJCVR-21 Handleiding

25 Mei 2023

Snow Joe SJ620-RM Handleiding

21 Mei 2023

Snow Joe 24V-SS11 Handleiding

14 Mei 2023

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Honda HSS760A Handleiding

21 Februari 2024

Honda HSS 760A T Handleiding

21 Februari 2024

Troy-Bilt Arctic Storm 34 Handleiding

31 Januari 2024

Troy-Bilt Storm 3090 Handleiding

31 Januari 2024

Troy-Bilt Arctic Storm 3010 XP Handleiding

31 Januari 2024

Troy-Bilt Storm 9528 Handleiding

31 Januari 2024

Troy-Bilt Storm 2840 Handleiding

31 Januari 2024

Troy-Bilt Storm 2620 Handleiding

31 Januari 2024

Troy-Bilt Storm 2600 Handleiding

31 Januari 2024

Troy-Bilt Squall 208E Handleiding

31 Januari 2024