Smart-AVI USB-100S Handleiding

Smart-AVI Wifi-repeater USB-100S

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI USB-100S (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties

of merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained

herein or for incidental or consequential damages

in connection with the furnishing, performance or

use of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

The USB-100 extends USB up to 275ft from the

computer using a single un-shielded CAT5 cable.

USB100

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

USB-100 Specifications

CAT5 (UTP) Maximum range 275ft (85m)

USB Data Data Rate of 12Mbps

Compatible with USB version 1.1

USB Connectors USB-TX100 Type A

USB-TX100 Type B

Power 5V DC@1A Internal

Dimensions (inches) 3.375” x 2.375” x 1”

Weight 0.14 lbs

S M A R T A U D I O V I D E O I N N O V A T I O N

Qty Description Part Number

1 USB-100 Transmitter USB-TX100

1 USB-100 Receiver USB-RX100

1 6’ USB A-B Cable CCUSBAB06

The USB-100 extends USB up to 275ft using a single

unshielded CAT5 cable with data rates up to 12Mbps.

Introduction

Extends USB port up to 275 feet from the •

computer.

Uses easy to install, inexpensive CAT5.•

Fully compliant with USB 1.1 specifications.•

Supports 1.5 and 12 Mbps data rate.•

Uses a single CAT5 UTP cable between transmitter •

and receiver.

Bus powered transmitter unit•

Fully transparent (does not use any emulation).•

Compact size.•

Supports MAC, PC and SUN.•

Plug and play.•

Features

What’s in the box?

USB-100

Please check the contents of the package before

beginning installation.

Installation and Operation

Connecting the Transmitter

1. Connect the transmitter to the host using the A-B

USB cable (included with the unit).

2. The A side of the connector would go to the com-

puter host and the B side would be connected to

the transmitter.

Note: You must connect the included USB-Hub to the

receiver unit for the system to work properly.

3. Connect the receiver to the peripheral device using

the included USB-Hub.

4. Join the USB-100 units using standard CAT5 UTP

cable.

Note:

The receiver provides remote power up to 500

mA to the connected peripherals. This power comes

from the host computer and is passed by the transmitter

to the receiver. In some applications, and external power

supply is required. SmartAVI can provide a power supply

for such cases with the receiver and transmitter units.

(optional)

Product specificaties

Merk:	Smart-AVI
Categorie:	Wifi-repeater
Model:	USB-100S
Kleur van het product:	Violet
Gewicht:	300 g
Breedte:	85 mm
Diepte:	84 mm
Hoogte:	35 mm
Soort:	Netwerkzender & -ontvanger
Aantal Ethernet LAN (RJ-45)-poorten:	1
Externe adapter:	Ja
Spanning:	5 V
Afmetingen (B x D x H):	85 x 84 x 35 mm
Maximaal bereik:	85 m
Overdrachtssnelheid:	12 Mbit/s
Ondersteundende kabel types:	Cat5