Seco-Larm MVE-WH010Q Handleiding

Seco-Larm Wifi-repeater MVE-WH010Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Seco-Larm MVE-WH010Q (4 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

MVE-WH010Q

Installation Manual

Wireless Extender for HDMI

NOTE: Products with model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.

 Wirelessly transmits HDMI from a source to a monitor up to 98ft (30m)

 Support resolutions up to 1080p

 Signal can pass through walls

 IR pass-through for remote control support

ENFORCER Wireless Extender for HDMI®

SECO-LARM U.S.A., Inc.

LED Indicator:

Dimensions:

Parts List:

1 x Transmitter

1 x Receiver

1 x Manual

1 x IR Remote extension

2 x Base

2 x 5VDC Adapter

Transmission frequency

5.1~5.9GHz

RF Communication system

MIMO

Modulation mode

OFDM

Frequency stability

- 4PPM

Bandwidth

40MHz

Transmission power

>15dBm

Receiving sensitivity

<-65dBm

System latency

<1ms

Range

Up to 98ft (30m)

IR Remote frequency

38kHz

Power supply

5VDC

Current draw

2A /- 10%

Dimensions

513/16” x 313/16” x

11 /16” (148 x 97 x 18mm)

Weight

15.4-oz (436g)

Operating temperature

14 ~122 F (-10 ~50 C)

Transmitter

Receiver

Specifications:

Transmission frequency

5.1~5.9GHz

Frequency stability

/- 4PPM

Bandwidth

40MHz

Transmission power

>12dBm

Receiving sensitivity

<-75dBm

System latency

<1ms

Power supply

5VDC

Current draw

2A /- 10%

Dimensions

513/16” x 313/16” x

11 /16” (148 x 97 x 18mm)

Weight

15.5oz (440g)

Operating temperature

14 ~122 F (-10 ~50 C)

Indicator

Working Status

Network

The transmitter and receiver

are connected to each other.

Off

The transmitter and/or receiver

are not connected to power.

Flashing

The unit is not working

properly. See troubleshooting.

Video

Video source or monitor is

connected to the unit.

Off

Video source or monitor is not

connected to the unit.

Transmitter & Receiver:

Base:

1”

(25mm)

/16”

(18mm)

/8”

(54mm)

47/16

” (113mm)

313

/16”

(97mm)

513 /16” (148mm)

ENFORCER Wireless Extender for HDMI®

SECO-LARM U.S.A., Inc.

Installation:

Sample Application:

Overview:

1. Determine the location where the wireless HDMI units will be placed.

Note: Do not place the transmitter near a device that would affect the transmission distance.

2. Connect the 5VDC adapter to the transmitter.

3. Connect the wireless HDMI transmitter to the HDMI port of the source device via HDMI cable.

4. Connect the IR remote extension to the IR remote signal output and point it at the IR sensor of the

HDMI source.

5. Connect the 5VDC adapter to the receiver unit.

6. Connect the wireless HDMI receiver to the HDMI port of the display or other device via HDMI cable.

7. Turn ON the source and display devices to test the functionality of the wireless HDMI system.

Note: The video source can be controlled remotely using the IR remote extension. Use any

IR remote control with a frequency of 38kHz.

Note: If video problems occur, reset both units. Use a pencil or small object to hold the reset button

of the receiver down for 3 seconds. Repeat the same process for the transmitter within 30

seconds. If transmitter is not reset with 30 seconds, power off and reboot both units.

Transmitter:

Receiver:

Up to 98ft (30m)

Transmitter

Included 5VDC

Power adapter

HDTV Display

Receiver

Included 5VDC

Power adapter

HDMI Cable

HDMI cable

IR Remote extension

IR Remote

receiving window

Reset button

Status indicators

Power input

HDMI Output

USB Input

(Not used)

Remote

DVR or HD Source

Base included for attractive,

convenient installations. If

using the base, always install

with the antenna end up.

Base

Power input

HDMI Input

IR Remote

signal output

Antenna

Status indicators

Reset button

Antenna

Product specificaties

Merk:	Seco-Larm
Categorie:	Wifi-repeater
Model:	MVE-WH010Q
Kleur van het product:	Wit
Breedte:	18 mm
Diepte:	97 mm
Hoogte:	148 mm
Soort:	Netwerkzender & -ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Stroom:	2 A
Aan/uitschakelaar:	Ja
Inclusief AC-adapter:	Ja
Bandbreedte:	0.04 GHz
Maximaal bereik:	30 m
Wifi:	Ja
AC-ingangsspanning:	5 V
Bedrijfstemperatuur (T-T):	-10 - 50 °C