SkyRC SK-500009 Handleiding

SkyRC Niet gecategoriseerd SK-500009

Lees hieronder de 📖 handleiding in het Nederlandse voor SkyRC SK-500009 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

INSTRUCTION MANUAL

The digital pitch gauge is designed for application in model helicopters and serves to measure

the rotor blade pitch value.

The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed

through LCD screen, providing a simple and precise way of measuring pitch angle.

- -1

DPG-010 DIGITAL PITCH GAUGE

Large LCD for easy reading

Up to 700 mm blades (Suitable for 250 to 700 size helicopters)

Fast and accurate measurement

Zero function

Auto rotating display

Auto power-off (Power shuts down after 20 minutes without any movement)

FEATURES

PULL OFF THE INSULATION

PAPER BEFORE USE

Power and

Zero Button

LCD Display

Blade Clamp

ILLUSTRATION

SPECIFICATIONS

Body Dimension

Suitable blade width

Detectable pitch range

Temperature

Resolution

Current consumption

Battery

Weight (including battery)

113x56x14mm

20mm~75mm

±90°

0~40°C

0.1°

2.8mA

CR2032 Lithium X2

40g

- -2

HOW TO USE

Press “POWER” button for about two seconds to turn on the power. For correct pitch

measurements, DPG-010 digital pitch gauge must be zeroed before being used. Press

“ZERO” button once to zero the gauge. Please refer to the below instruction to understand

how to use DPG-010. After used, Press “POWER” button for about two seconds to turn off.

HOW TO CHANGE BATTERIES

Low battery could contribute to reduced screen brightness and abnormal startup. Please

replace battery should this occurs.

Open the battery compartment by removing the four screws at the back of the pitch gauge

with a philips-head screw driver.

Remove the battery compartment cover.

Insert / replace two CR2032 batteries while observing the correct polarity.

Close the battery compartment and fasten it with the four screws.

Should the pitch gauge display abnormal behavior after accidental shock or impact, proceed

to remove and re-install battery to reset the device.

Manufactured by

SKYRC TECHNOLOGY CO LTD ., .

www skyrc com. .

RoHS

7504-0315-01

Place the DPG-010 horizontally

leveled with top of helicopter

frames.

Press “ZERO” to zero the

gauge.

ZERO THE GAUGE

Mount the DPG-010 on main

blade to measure the pitch.

MEASURE THE PITCH

Product specificaties

Merk:	SkyRC
Categorie:	Niet gecategoriseerd
Model:	SK-500009
Kleur van het product:	Black, Red
Breedte:	113 mm
Diepte:	56 mm
Hoogte:	14 mm
Aantal:	1
Bedrijfstemperatuur (T-T):	0 - 40 °C
Type product:	Digitale hoogtemeter