Simrad PUMP-1 to PUMP-5 Handleiding
Pagina's 8 Engels Niet gecategoriseerd
Bekijk de handleiding van Simrad PUMP-1 to PUMP-5 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
REV: B 3 May 2 –202
02MAN00025 Rev B Page 1 of 8 Subject to change without notice CV
SELECTION & INSTALLATION GUIDE REVERSING GEAR PUMPS –
Pump family overview
This family of high efficiency pilot drive gear pumps is available in five models covering nominal flow sizes of:
0.8, 1.6 and 3.0 lpm. The 0.8 and 1.6 lpm sizes come with motorswhile the 3.0 lpm size is available in both 12V,
12Vdc and 24Vdc. Other than Pump 1, all motors in this family feature externally replaceable motor brushes.
The pumps are reversible and therefore need an external direction control valve to change flow don’t
direction. All models include integral lock valves to ensure positive load holdingThe pumps can only be used .
with balanced cylinders.
Pump schematic
1.DC motor (permanent magnet type)
2.Reversible gear p ump
3.Inlet checvalves k
4.Dual lock valves (n-return valves) on
5.Stop cocks (not supplied with pump)
6.A + B main lines
7.Balance line Ctsteering unit/expansion t –o ank
Balance port tsteering o
unit reservoir
A&B ports
tmain lines o
Externally replaceable brushes
Note :
Pump 1 (000-11770-002) does
not include replaceable brushes
Product specificaties
| Merk: | Simrad |
| Categorie: | Niet gecategoriseerd |
| Model: | PUMP-1 to PUMP-5 |
Heb je hulp nodig?
Als je hulp nodig hebt met Simrad PUMP-1 to PUMP-5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden