Simpson 90039 Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Simpson 90039 (20 pagina's) in de categorie Hogedrukreiniger. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
140*213MM
Part No. 90032/90033 Rev.0 APRIL 2015
INDUSTRIAL TRIPLEX PUMPS
Industrial Triplex Pumps
Bombas industrial triple
Pompes triple industrielle
INSTRUCTION MANUAL
MANUAL DE
INSTRUCCIONES
MANUEL Dโ€™UTILISATION
Model Max PSI Max GPM
10.0 GA13
(530003) 3800 3.5
9.4 GA13
(530004) 4000 3.3
IMPORTANT: Please make certain that the person who is to use this equipment carefully
reads and understands these instructions before operating.
IMPORTANT๎˜Ÿ : Assurez-vous que toute personne qui utilisera cet รฉquipement lise
attentivement ces instructions avant de lโ€™utiliser.
IMPORTANTE: Asรฉgurese por favor de que la persona que vaya a utilizar este equipo lea
con cuidado y comprenda estas instrucciones antes de operar.
VEA EL ESPAร‘OL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIร“N,
CENTROS DE SERVICIO Y Pร“LIZA DE GARANTรA. ADVERTENCIA:
Lร‰ASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
SAVE THI MANUAL FOR UTURE REFERENCES F
LISEZ ET CONSERVEZ CES INSTRUCTIONS
CONSERVE ES S INSTRUCCIONES PARA FUTURAS CONS STA ULTA
Contact our Customer Service Department at 1-877-362-4271
Contacter notre dรฉpartement de service clients ร  1-877-362-4271
Contรกctese con nuestro Departamento de Servicio al Cliente llamando
al 1-877-362-4271
140*213MM
2- ENG
INSTRUCTION MANUAL Industrial Triplex Pumps
INDUSTRIAL TRIPLEX PUMPS
State of California to cause cancer, birth
defects or other reproductive harm.
Wash hands after handling.
WARNING: Adequate protective
guards must cover all moving parts.
Perform routine maintenance on the
pump and components.
WARNING: Use only components
that are rated for the flow and pressure
of the pump, this would include hose,
fittings, safety valves, spray guns etc.
D PESCRI TION
Designed to work at 3400 RPM when
coupled to a gasoline engine. The 1"
(25.4๎˜Ÿmm) hollow shaft and universal
mounting flange provides connection
to most 1" (25.4๎˜Ÿmm) shaft, horizontal
engines.
SPECI ICATIONSF
Oil Capacity: 13 oz. (384 ml)
Ports
Inlet Port (Supplied) Standard :
garden hose connection with inlet
strainer.
:Discharge Port (Supplied) 3/8"
Quick Connect connection.
Thermal Relief Valve (Supplied):
When the temperature inside the pump
rises too high, this valve will open and
release a gush of water in an effort to
lower the temperature inside the pump.
The valve will then close.
Detergent Injection System (Supplied):
Mixes cleaners or cleaning solvents
with the water to improve cleaning
effectiveness.
NOTICE: Allowing the unit to run for
more than two minutes without the
gun trigger being pulled could cause
overheating and damage to the pump.
G AF NFENERAL S ETY I ORMATION
Please read and save these instructions.
Read carefully before attempting to
assemble, install, operate or maintain
the product described. Protect yourself
and others by observing all safety
information. Failure to comply with
instructions could result in personal
injury and/or property damage! Retain
instructions for future reference.
DANGER: RISK OF
INJURY FROM SPRAY
Always wear safety glasses or goggles
and appropriate clothing.
WARNING: RISK
OF URSTING B
t๎˜ 5IF QVNQ JT EFTJHOFE UP QVNQ OPO๎˜Ž๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜
GMBNNBCMF PS OPO๎˜ŽFYQMPTJWF GMVJET๎˜๎˜ ๎˜ ๎˜ ๎˜
5IFTF QVNQT BSF JOUFOEFE UP QVNQ๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜
DMFBO GJMUFSFE XBUFS POMZ๎˜๎˜ ๎˜ ๎˜ ๎˜
t๎˜ %P๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜OPU PQFSBUF JO PS BSPVOE BO
FYQMPTJWF FOWJSPONFOU๎˜๎˜ ๎˜
t๎˜ %P๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜OPU BMUFS UIF QVNQ GSPN UIF
NBOVGBDUVSFST EFTJHO๎˜๎˜
t๎˜ %P OPU PQFSBUF HBTPMJOF FOHJOFT JO๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜ B๎˜
DPOGJOFE BSFB๎˜œ BMXBZT IBWF BEFRVBUF๎˜ ๎˜ ๎˜ ๎˜ ๎˜
WFOUJMBUJPO๎˜
t๎˜ %P๎˜OPU๎˜FYDFFE๎˜UIF๎˜QVNQ๎˜TQFDJGJDBUJPOT๎˜
JO TQFFE PS QSFTTVSF๎˜๎˜ ๎˜ ๎˜
WARNING: RISK OF
H OT SURFACES
t๎˜ %P OPU BMMPX DIJMESFO UP PQFSBUF UIF๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜
QVNQ๎˜
t๎˜ /FWFS QPJOU UIF IJHI๎˜ŽQSFTTVSF๎˜ ๎˜ ๎˜ ๎˜
EJTDIBSHF BU QFSTPO๎˜ BOZ QBSU PG UIF๎˜ ๎˜B๎˜ ๎˜ ๎˜ ๎˜ ๎˜ ๎˜
CPEZ PS BOJNBMT๎˜๎˜ ๎˜
t๎˜ .BYJNVN๎˜XBUFS๎˜UFNQFSBUVSF JT๎˜ ๎˜๎˜’๎˜•๎˜‘ยก'๎˜
WARNING: This product and its
exhaust contain chemicals known to the
State of California to cause cancer, birth
defects or other reproductive harm. In
addition, some cleaning products and
dust contain chemicals known to the
140*213MM
3 - ENG
INSTRUCTION MANUAL Industrial Triplex Pumps
INDUSTRIAL TRIPLEX PUMPS
Do not let the pressure washer run
for more than two minutes in Bypass
Mode. Turn off the engine and relieve
the pressure in the gun during these
extended situations.
WARNING: To reduce the
possibility of contamination always
protect against backflow when
connected to a potable water system.
INSTALLATION
1. Install the shaft key into the key
way and apply a light coating of
anti-seize on the engine shaft and
key.
2. Align the two key ways and push
the pump completely onto the
engine.
3. Install all four (4) bolts and tighten
evenly. Torque to 25-27 ft-lbs.
HOW PPTO A LY CH /EMICALS
CLEANING SOL V ENTS
Applying chemicals or cleaning solvents
is a low pressure operation. Use NOTE:
only soaps and chemicals designed
for pressure washer use. Do not use
bleach.
To Apply Chemicals:
1. Ensure detergent siphon hose is
attached to barbed fitting location
near high pressure hose connection
of pump as shown.
2. Place other end of detergent siphon
hose with filter on it into container
holding chemical/cleaning solution.
NOTE: For every 7 gallons of water
pumped 1 gallon of chemical/
cleaning solution will be used.
3. Place the spray wand in the low
pressure or siphon setting.
4. After use of chemicals, place
detergent siphon hose into
container of clean water and draw
clean water through chemical
injection system to rinse system
thoroughly. If chemicals remain in
the pump, it could be damaged.
Pumps damaged due to chemical
residue will not be covered under
warranty.
NOTE: Chemicals and soaps will not
siphon if spray wand is not in the low
pressure/siphon setting.
MAINTENANCE
WARNING: Risk of burn hazard.
When performing maintenance, you
may be exposed to hot surfaces,
water pressure or moving parts that
can cause serious injury or death.
NOTE: The Pump was filled with oil
at the factory. The preferred oil is
SIMPSON
ยฎ
Premium Pump Crankcase
Oil (part #80138). If this oil is not
available, an SAE 15W-40 oil may be
used. Change the pump oil after the
first 50๎˜Ÿhours of operation and every 100
hours thereafter, or every 3๎˜Ÿmonths.
TO CH K OEC IL
The oil level should come to the dot in
the middle of the sight glass (AA).
CC
AA
BB
HOW TO CHANGE PUM ILP O
1. Loosen pump oil fill plug (BB).
2. Place a container under the pump
oil drain plug (CC).
3. Remove pump oil drain plug.
4. After oil is drained, replace pump oil
drain plug. Tighten securely.


Product specificaties

Merk: Simpson
Categorie: Hogedrukreiniger
Model: 90039

Heb je hulp nodig?

Als je hulp nodig hebt met Simpson 90039 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hogedrukreiniger Simpson

Handleiding Hogedrukreiniger

Nieuwste handleidingen voor Hogedrukreiniger