SilverStone XE04-4189 Handleiding


Pagina's 2 Engels Hardwarekoeling

Bekijk de handleiding van SilverStone XE04-4189 gratis online of download de PDF. 14 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

Figure 1Figure 2
Figure 3 Figure 4
Carer Latches and keying ri
Pin 1 d triangle ma on carrier top solirk
Pin 1 how llo
tangle ma on rirk
carer boom de ri�si
Install the processor first with the plastic carrier. Align the golden color triangle mark with the hollow triangle mark on the
carrier, then align the key on the processor IHS cover and side, push the processor and confirm the 4 clips securely
locked (Figure 1 &2)
Note: the carrier latches must be fully engaged with the keying slots on the edges of the processor and the processor
must be securely seated on the carrier after insertion.
1.
2.
Remove the heatsink from its packaging and remove the protection cover of Thermal Interface Material (TIM). The
required amount of TIM has been pre-applied on the bottom of the heatsink. Inspect the pre-applied TIM for any damage
before use.
Identify processor Pin 1 and onboard socket Pin 1 to decide the heatsink installation direction; for certain motherboards,
the Pin 1 location will be different with CPU1 and CPU2. (Figure 3 & 4)
Note: The complete assembly of processor, carrier, and heat sink is called Processor Heat Sink Loading Module (PHLM)
or Processor Heat Sink Module (PHM).
3.
4.
Hw Tangle ollori
Maer on the rk
Carerri
1.
Pin-1 den Gol
Tangle Maerirkr
bothn CPU o
Top and Boo�m
Substrate
2.
Sd Tangle oliri
Maer on the rk
Carerri
3.
1
1
2
2
3
3
XENON (XE) SERIES – Assembly Guide for
LGA4677, LGA4189 Socket Coolers

Beoordeel deze handleiding


Product specificaties

Merk: SilverStone
Categorie: Hardwarekoeling
Model: XE04-4189

Heb je hulp nodig?

Als je hulp nodig hebt met SilverStone XE04-4189 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden