SIIG CE-H21U11-S1 Handleiding

SIIG Wifi-repeater CE-H21U11-S1

Lees hieronder de 📖 handleiding in het Nederlandse voor SIIG CE-H21U11-S1 (12 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

Introduction

The HDMI Wireless Extender provides an easy way to

extend HDMI signals wirelessly up to 80 meters.

Features and Benefits

• Sends video and audio from your HDMI source to

TV/display wirelessly in 1080p quality

• Transmits content up to 80 meters LOS (Line of

Sight) with no latency

• Supports 2.4GHz frequency with channel hopping

– channel automatically changes when an

interference is detected with other RF sources

• IR extender to control HDMI source device from the

remote HDMI display end

• Complete kit with a Transmitter (TX) and Receiver

(RX)

• HDMI output on Transmitter (TX) for a local TV/

display next to the source device

• Wall mountable

• LED status indicators for Power and Wireless

connection

System Requirements

• PC or A/V devices with an available HDMI output port

• HDMI display

04-0909A

HDMI Wireless Extender

Installation Guide

Package Contents

•HDMI Wireless Extender (Transmitter x1, Receiver

x1)

• HDMI cables (2)

• Power adapters (5V/2A for Transmitter, 5V/1A for

Receiver)

• IR blaster cable

• Screws for wall mount (4)

• Installation guide

Application

Figure 1: Application

HDMI Display

HDMI

ODD Player

HDMI Display

IR Blaster

Receiver

Transmitter

Remote Control

• Wireless LED: Red when the connection is

established; flashing when searching for signal or

disconnected

• Power LED: Red when the power adapter is

connected; turns Green when powered on

• Antenna: Sends the signal to the receiver

• Power Button: Turns the transmitter On/ Off

• Power Jack: Plug in the included 5V/2A power

adapter here

• Pairing Button: Press to connect to the receiver

• HDMI In: Connects to your HDMI source device

(DVD player, etc) using the included HDMI cable

• HDMI Out: For local monitor; connects to your

HDMI display using an HDMI cable (cable not

included)

• IR Blaster: Plug in the included IR Blaster cable

here. See IR Blaster Cable on page 4 for more

information

Layout

Transmitter

Power

Button

Power LED

Wireless LED Pairing Button

HDMI In

Antenna

Power Jack

IR Blaster HDMI Out

Figure 2: Transmitter Layout

Product specificaties

Merk:	SIIG
Categorie:	Wifi-repeater
Model:	CE-H21U11-S1
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
Meegeleverde kabels:	HDMI
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Certificering:	FCC, CE, RoHS
Aansluiting voor netstroomadapter:	Ja
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
Duurzaamheidscertificaten:	RoHS
HDMI in:	1
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	164 x 34.54 x 124.46 mm
Maximaal bereik:	80 m
AC-ingangsspanning:	100-240 V
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent
Receiver gewicht:	381 g
Transmitter afmetingen (WxDxH):	164 x 34.54 x 124.46 mm
Transmitter gewicht:	381 g