SereneLife SLTWF35LED Handleiding

Bekijk gratis de handleiding van SereneLife SLTWF35LED (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over SereneLife SLTWF35LED of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Tabletop Water Fountain

SLTWF35LEDQUICK GUIDE

SETUP INSTRUCTIONS:

1. Ensure the water ow pipe and LED light cable is

connected securely at the bottom of the fountain.

2. Add water to the bowl and plug in the power supply.

3. There should be enough water in the fountain tray

so that it covers the water pump.

TROUBLESHOOTING:

1. If your fountain pump fails to operate please check the following:

•Make sure the pump is plugged into the wall outlet/socket properly.

•Check the water level in the fountain. Running the pump without sucient water can damage the pump.

•Check the power switch of the ow control on the pump. See picture 2 above.

•Check the pump outlet nozzle and the water tube for dirt and debris. Clean if necessary.

•Make sure the pump is connected to the water tube tightly. Check the fountain tubing for kinks and obstructions

•The pump may be "air locked", Power the pump ON & OFF several times to clear any air that may have been trapped.

2. If the water does not ow out of the fountain, it may be caused by a kinked or loose water tube,

make sure the water tube is clear of any obstruction and tted properly.

www.PyleUSA.com

Be careful not to spill water onto the power plug of the pump.

DO NOT allow the pump to run dry or with an inadequate amount of water!

2

Power of pump can be

controlled

*Water ow pressure/intensity can be controlled with

the adjustable power level located on the pump

Product specificaties