SereneLife SLTWF30 Handleiding
Pagina's 1 Niet gecategoriseerd
Bekijk de handleiding van SereneLife SLTWF30 gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
Tabletop Water Fountain
SLTWF30QUICK GUIDE
SETUP INSTRUCTIONS:
1. Connect the pump to the water-pipe connector
located at the bottom of the fountain .
2. Ensure the power switch on the pump is turned ON
and position into the water fountain bowl.
3. Add water to the bowl and connect the power cable.
TROUBLESHOOTING:
1. If your fountain pump fails to operate please check the following:
•Make sure the pump is plugged into the wall outlet/socket properly.
•Check the water level in the fountain. Running the pump without sucient water can damage the pump.
•Check the power switch of the ow control on the pump. See picture 2 above.
•Check the pump outlet nozzle and the water tube for dirt and debris. Clean if necessary.
•Make sure the pump is connected to the water tube tightly. Check the fountain tubing for kinks and obstructions
•The pump may be "air locked", Power the pump ON & OFF several times to clear any air that may have been trapped.
2. If the water does not ow out of the fountain, it may be caused by a kinked or loose water tube,
make sure the water tube is clear of any obstruction and tted properly.
www.PyleUSA.com
2
Power of pump can be
controlled
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
1
Product specificaties
| Merk: | SereneLife |
| Categorie: | Niet gecategoriseerd |
| Model: | SLTWF30 |
Heb je hulp nodig?
Als je hulp nodig hebt met SereneLife SLTWF30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden