Sencor SCA BA88 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Sencor SCA BA88 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
SCA BA88
Pre-calibrated
sensor module USER´S MANUAL
EN – 2
Content
1 – Remove old sensor
2 – Install new sensor
3 – User device reset (no need to use it in case of new sensor)
1. Remove old sensor module
1.1 Slide the power switch to “OFF” position (red)
1.2 Remove the bottom cover
1.3 Remove the plastic fuse
EN – 3
1.4 Remove sensor module
2 Install a new sensor module
2.1 Put the sensor module into the compartment and push it to top position


Product specificaties

Merk: Sencor
Categorie: Niet gecategoriseerd
Model: SCA BA88

Heb je hulp nodig?

Als je hulp nodig hebt met Sencor SCA BA88 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sencor

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd