Scanstrut SC-V-P1 Handleiding

Bekijk gratis de handleiding van Scanstrut SC-V-P1 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Scanstrut SC-V-P1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT

ESLEA ESTAS INSTRUCCIONES ANTES DE INSTALAR EL PRODUCTO

FR-CALIRE CES INSTRUCTIONS AVANT D’INSTALLER LE PRODUIT

scanstrut.com

Ventura Series

Dual 125V 20A AC Outlet

Electrical Information

& Installation Instructions

SC-V-P1

UK / EMEA / APAC

Scanstrut Ltd, 14 Dart Business Park,

Clyst St. George, Exeter, EX3 0QH

USA

Scanstrut Inc. 7 Pequot Park Rd,

#303 Westbrook, CT 06498

RevA OEM-INST005766

For the latest tech info visit

scanstrut.com

Technical Information

Rating20A 125V

Cable

12AWG Triplex Recommended

Copper cable must be used for installation

Receptacle

• Grounded duplex NEMA 5-20R - UL & CSA-listed

• Screw terminals

• Replace receptacle only with Scanstrut part

number SC-UTIL-P-006285 (Qualtek 740W-F/06)

1 x Rear Housing1 x Front Housing

Parts List

1 x Rubber Grommet1 x Receptacle1 x Torx Bolt

1 x Cable Strain

Relief Bracket

4 x No. 6 Flange Screws

5 x 3mm Screws

Drill

Jigsaw

Drill Bit

ø 2.5mm (3/32”) | ø 8mm (5/16”) | ø 12.5mm (1/2”)

Tools Required

Silicone or

Automotive Sealant

Screwdrivers

PH1 | PH2 | T15

Material

Pilot Drill

Size

Fixing

Soft Material

eg. plywood

2.5mm

(3/32”)

Included

4x No.6 Screws

Hard Material

eg. fiberglass,

hardwood, acrylic

3mm

(1/8”)

Metal eg. steel,

aluminium

4mm

(5/32”)

Recommended

Flanged M4 Panhead

Bolts, Washers and

Nyloc Nuts

(Not included)

Drilling Template Scale 1:1

• Cut out template

• Tape to mounting surface

• Use template to drill:

4x ø2.5mm (3/32”) holes

3x ø8mm (5/16”) holes

2x ø12.5mm (1/2”) holes

1

Installation

• Jigsaw inside of the cutting boundary.

DO NOT exceed boundary area.

• Test fit the product - if needed, file the cut

area until a tight fit is achieved.

• Clean mounting surface.

2

• Remove receptacle

(1x Torx T15 bolt)

from front lid assembly.

3

• Fit grommet to rear housing.

• Cut grommet cross hairs to required size

for chosen installation cable.

• Slide length of installation cable

through grommet - cable must

not be connected to

live power source.

4

• Strip wires as required to suitable length

(minimum 7mm (0.28”), then connect and

secure to receptacle terminals:

• Green Ground wire - green screw

• White Neutral wire - silver screws

• Black Hot/Line wire - gold screws

5

• Pull through the mounting

surface and fix the wired

receptacle to the front

housing with the

Torx T15 screw.

• Ensure the ground terminal

is orientated correctly.

6

• Slide rear housing over wired

receptacle.

• Secure to housing assembly

with 3x 3mm PH1 screws.

7

• Apply silicone/automotive sealant to the

4x No.6 PH2 flanged mounting screws.

• Secure the housing assembly to the

mounting surface - DO NOT over tighten

the screws.

8

• Choose the desired installation

cable rear exit orientation.

• Place the cable strain-relief

bracket over the protruding

cable sheath.

• Clamp cable to the rear

housing with the 2x

remaining 3mm PH1 screws.

9

• Professional electrician installation only for

connecting receptacle wiring to onboard 125V system.

• Connect to a breaker (GFCI recommended).

10

File

If daisy chaining connection to multiple

receptacles, the slot features in the

strain-relief bracket can be used to

secure an additional cable to it with a

suitably sized cable tie (not included).

4x

2.5mm (3/32")

2x

12.5mm (1/2")

3x

8.0mm (5/16")

72.5mm (2.85")

68.2mm (2.69")

94.0mm (3.70")

38.0mm (1.50")

31.7mm (1.25")

80.5mm (3.17")

41.8mm (1.65")

43.0mm (1.69")

110.0mm (4.33")

69.0mm (2.72")

50mm

2”

�5mm

0.5”

WARNING:

CHECK SCALE

1

2

3

WH

BK

GN

OR

This product must be mounted strictly in accordance with the provided mounting template

and must not be installed in any location where submersion or partial submersion may occur.

TOP ^

• Only daisy chain to circuit with other 20A duplex receptacles. Do not connect to 15A circuit.

• If daisy chaining to multiple 20A receptacles in a circuit, utilize appropriate wire gauge cable

size per Industry Standards.

• If daisy chaining to multiple 20A receptacles, the first receptacle in the circuit must be

GFCI protected.

Product specificaties