Saturn ST-CC7116 Handleiding

Saturn Strijkijzers ST-CC7116

Lees hieronder de 📖 handleiding in het Nederlandse voor Saturn ST-CC7116 (36 pagina's) in de categorie Strijkijzers. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
1
ST-CC7116
IRON
УТЮГ
ПРАСКА
PEGLA
2 3
GB
IRON
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our
devices will become safe and
reliable assistance in your
housekeeping!
Avoid extreme temperature
changes. Rapid temperature change
(e.g. when the unit is moved from
freezing temperature to a warm
room) may cause condensation
inside the unit and a malfunction
when it is switched on. In this case
leave the unit at room temperature
for at least 1.5 hours before
switching it on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours
before starting operation.
Description
1. Temperature Control
2. Burst of steam button
3. Spray button
4. Spray nozzle
5. Water inlet
6. Pilot Light
7. Steam control knob
8. Sole plate
9. Housing
10. Water Tank
11. Rear Cover
IMPORTANT SAFEGUARDS
1. Please read all instructions carefully
before using the appliance for the first
time.
2. Before connecting the appliance,
check if the voltage indicated on the
rating plate corresponds with the mains
voltage in your home.
3. Do not use appliance for anything
other than its intended use.
4. The iron should always be switched
off with the Temperature Control Dial
before connecting or disconnecting from
the power supply. Do not pull on the
cord to disconnect the plug from the
wall socket.
5. Do not use the iron if it is damaged in
any way. Do not operate the iron with a
damaged cord or plug. Do not replace
the power cord or any other parts
yourself - contact Customer Support for
assistance.
6. When you have finished ironing or
when you are leaving iron unattended:
- turn the steam control knob (7) to
position "O", and the Temperature
Control Dial to OFF
- stand the iron upright
- disconnect the iron from the wall
outlet.
7. Do not allow children to touch the
iron or power cord when ironing .
8. Do not immerse the iron or the cord
into water or any other liquid.
9. Do not touch hot metal parts, hot
water or steam. These parts become hot
and may cause burns. Take care if you
turn the iron upside down; there may be
hot water in the tank.
10. The plug and cord should not be
allowed to touch the hot sole plate. Let
the iron cool down completely before
taking it away. Roll the power cord
around the iron for storage.
11. Disconnect the iron from the wall
outlet while filling with water or when
emptying the water after use.
12. The iron is for household use only.
13. When placing the iron on its stand,
ensure that the surface on which the
stand is placed is stable.
14. The iron is not to be used if it has
been dropped, if there are visible signs
of damage or if it is leaking.
15. The iron must be used and rested
on a stable surface.
16. If the power cord is damaged or
defective, it must be replaced by an
authorized service center to avoid a
hazard.
17. The appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given


Product specificaties

Merk: Saturn
Categorie: Strijkijzers
Model: ST-CC7116

Heb je hulp nodig?

Als je hulp nodig hebt met Saturn ST-CC7116 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzers Saturn

Handleiding Strijkijzers

Nieuwste handleidingen voor Strijkijzers