Satco S11964 Handleiding

Pagina's 2 Monitor

Bekijk de handleiding van Satco S11964 gratis online of download de PDF. 24 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

PDF downloaden (0.3 MB) Specificaties

LED T8 TUBES

Models: S

11964,S11965,S11966,S11967

INSTALLATION AND SAFETY INSTRUCTIONS

Satco Products, Inc.

WARNING:

• DANGER: Risk of shock-disconnect power before

installation.

•

LED

• WARNING: Product must be installed in accordance

with the national electrical code or your local electrical

code. If you are not familiar with these codes and

• WARNING: Install this kit only in luminaries that have

the construction features and dimensions shown in the

photographs and/or drawing and where the input rating

luminaire.

• WARNING: To prevent wiring damage or abrasion,

do not expose wiring to edges of sheet metal or other

sharp objects. Do not make or alter any open holes in

any enclosure of wiring or electrical components during

kit installation.

• WARNING:

bi-pin lampholders. NOTE: Shunted lamp holders are

words “Instant Start” or “I.S.” marked on the ballast.

This designation may be in the form of a statement

pertaining to the ballast itself, or may be combined

with the marking for the lamps with which the ballast

is intended to be used, for example F40T 12/IS, for

manufacturer.

Installers should not disconnect the existing wire from

lampholder terminals to make new connections at

lampholder terminals. Instead installers should cut

existing lampholder leads away from the lampholder

and make new electrical connections to lampholder

lead wires by employing applicable connectors.

• WARNING: Luminaire wiring and electrical parts

Check for enclosed wiring and components.

• WARNING: Check the existing wiring for damage

before installing upgrade kit. Do not install if existing

wires are damaged.

luminaire where the suitability of the combination shall

be determined by authorities having jurisdiction.

•

operate the originally intended lamp,” shall be marked

during normal maintenance including lamping.

•Do not use with dimmers.

• Suitable for damp locations. Suitable for use in

enclosed luminaries.

• This device is not intended for use with emergency

exits.

• This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received,

including interference that may cause undesired

operation.

Installation instructions on back.

Beoordeel deze handleiding

Product specificaties

Merk:	Satco
Categorie:	Monitor
Model:	S11964

Heb je hulp nodig?

Als je hulp nodig hebt met Satco S11964 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Satco S11964 Handleiding

Product specificaties

Heb je hulp nodig?

Handleiding Monitor Satco

Populair in Monitor

Handleiding Monitor

Nieuwste handleidingen voor Monitor