Saramonic SmartMixer Handleiding

Saramonic Niet gecategoriseerd SmartMixer

Lees hieronder de 📖 handleiding in het Nederlandse voor Saramonic SmartMixer (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1 PRODUCT INTRODUCTION

1.1 General Introductions

The Saramonic SmartMixer is a compact and lightweight audio mixer with phantom power and ampliﬁer, ideal for iOS and Android

mobile devices video production.

The mixer features one mini XLR input for balanced microphones and two microphone/line inputs for the included condenser

microphones or other user-supplied microphones. A volume control knob and level meter allow easy adjustment of the input level. A

headphone monitor output allows you to monitor the input and playback signal.

It comes with an aluminum handgrip for recording on the move, or it can be mounted on a tripod for stationary use. The included

device holder allows the SmartMixer to be used in either landscape or portrait orientations.

The audio quality and versatile operation of the SmartMixer make it ideal for both professional and in-home applications.

1.2 Highlights

• Improves audio quality of smart phone

• Two 1/8”(3.5 mm) stereo line/mic inputs

• One mini XLR microphone input

( a mini-XLR to standard-XLR cable included)

• +48V phantom power

• One 1/8”(3.5 mm) stereo line output to phone

• One 1/8”(3.5 mm) headphone monitor output

20 Hz to 20 Khz (+/-0.5 dB)

82 dB @ 1 kHz, -30 dBu input

less than 0.03% @ 1 kHz, -30 dBu input

15 dB

5V power supplies

48V power supplies

-18 dB to +3 dB in 3 dB increments

9V alkaline or lithium battery

L 95 x W 35 x H 298 mm

0.74 kg (26.1 oz.)

1.4 Product Structure

• PLAY/REC monitor switch

• Independent L/R level meters

• Volume control knob

• Includes two plug-in power condenser microphones

• Includes a device holder and aluminum hand grip

• Power provided by 9V battery

Condenser Microphones

Cold Shoe

Mini XLR Microphone Input

Volume Control Knob

Hand Grip

Device Holder

PLAY / REC

Monitor Switch

48V Phantom Power

/ Power On / Power Off

Level Meter

Headphone Jack

Output

Thumb Screw

Microphone Input

1.3 Speciﬁcations

Frequency Response

Noise

Distortion

INPUT 1 GAIN

INPUT 2 GAIN & MINI XLR Jack

INPUT 1 & INPUT 2 Power

MINI Jack Phantom Power

Level Meter

Power Requirements

Dimensions

Weight

Output Cable

for iOS

Output Cable

for Android

2 Quick Start Guide

2.1 Install 9V battery. Gently slide out the battery cover at the back of unit. Insert the battery with the “+” positive terminal lined up

with the “+” indicator on the battery compartment.

2.2 Mount the SmartMixer on the supplied device holder, and screw them together with the included hand grip or separately-sold

tripod or other standard support.

2.3 Mount your smart phone to the device holder. Please adjust the width of the device holder by the thumb screw according to

the size of your phone.

2.4 Connect the SmartMixer to your iOS or Android mobile device's headphone jack by the corresponding supplied cables.

2.5 Plug in the supplied condenser microphones or other user-supplied XLR microphones or audio sources to the inputs of SmartMixer.

2.6 Turn on the SmartMixer. Slide the power switch to ON.

2.7 If your microphone needs phantom power, please slide the power switch to the +48V position to turn on the phantom power.

Note: Please turn on phantom power ONLY if the microphone clearly say it’s needed, as the current may damage it.

2.8 Plug an earphone into the monitor jack on the SmartMixer to monitor the audio. Be sure that the volume control is set low before

recording to avoid excessively loud audio from damaging your hearing.

2.9 Select the PLAY/REC monitor switch

Select PLAY for monitoring playback audio from the mobile devices.

Select REC for monitoring audio directly from the microphone or audio source while recording.

2.10 You are now ready to record:

Adjust the volume control ﬂexibly to get the the optimum signal levels.

Check the input level meter in dB for each channel.

If you hear echoes when recording, please lower the volume with the volume control knob.

3 Warranty

3.1 Saramonic International provides one-year warranty under normal use and lifelong paid maintenance from the date you purchase

this product.

3.2 Saramonic International will repair or replace the product that under the warranty for free during the one-year valid period, but

customers should pay for shipping and insurance charges for returning the product to Saramonic International.

3.3 This warranty only applies where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship

during the warranty period.

3.4 This warranty does not cover:

(a) All damages caused by human factors include using the products in abnormal conditions and operate the device without according

to the user manual.

(b) The guarantee is invalid if defect is caused by incorrect use, poor maintenance or if persons not authorized by Saramonic International

have carried out alterations or repairs.

(d) Force majeure such as ﬁre, ﬂood, lighting stroke, earthquake.

(e) Customers who can not show valid invoice.

3.5 Wherever you purchased our products, you will be served very well at local retailer.

3.6 Saramonic International reserves all the rights for the ultimate interpretation.

4 Compatibility

Compatible with iPhone/iPod touch/iPad and Android mobile devices.

5 Packing List

SmartMixer main unit

Two plug-in power condenser microphones

Device holder

Aluminum hand grip

One mini-XLR to standard-XLR cable

One 1/8”(3.5 mm) output calbe for iOS

One 1/8”(3.5 mm) output calbe for Android

User Manual

Warranty Card

Product specificaties

Merk:	Saramonic
Categorie:	Niet gecategoriseerd
Model:	SmartMixer
Kleur van het product:	Black, Red
Gewicht:	740 g
Breedte:	35 mm
Diepte:	95 mm
Hoogte:	298 mm
Compatibiliteit:	iPod, iPad, iPhone
Type mobiele apparatuur:	Mobiele telefoon/Smartphone