Samsung AR13NVFXAWKNSV Handleiding

Bekijk gratis de handleiding van Samsung AR13NVFXAWKNSV (4 pagina’s), behorend tot de categorie Airco. Deze gids werd als nuttig beoordeeld door 78 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over Samsung AR13NVFXAWKNSV of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Please scan this QR code for detail video of indoor unit installation.

In order to install the indoor unit, you must disassemble the cover panel rst. Please proceed following

instructions to disassemble and assemble the cover panel. Hooks (on the cover panel) may get damaged

If you apply excessive force as you disassemble and assemble the cover panel. Please follow the following

instructions.

Removing the screws

Cover panel is assembled on the bottom part of the indoor unit (as shown in the illustration) and it is fastened

with screws. Remove the Cap screw rst and unfasten the screws so that you can disassemble the cover panel.

<Remove the Cap screw><Unfasten the screw>

Cap Screw

Cover Panel

Removing the Cover panel (Before mounting the indoor unit)

The bottom panel ts the main body using the side, center, and bottom hooks as shown. Unlock the side hooks

rst, and then unlock the center and bottom hooks.

Check the location of the hooks before removing the cover panel.

▶Location of the hooks on the central part

Number and location of the hooks

Center hookBottom hook

※For specic Hook location and quantity, please

refer to cover panel with indicating arrows based

on physical goods.

Side

hooks

Center hooks

Bottom hooks

▶Removing the hooks on the side

※Caution (fragile)

˗Gently press the both side of the cover panel

inwards () and release the hooks on both

sides( ).

▶Removing the hooks on the central part

※Caution (fragile)

˗Use both hands

˗Release each hook by pushing it up at an angle.

Assembling the Cover panel (After mounting the indoor unit)

To assemble the Cover panel, proceed in reverse

order of disassembling. Use both hands for

assembling and be extra careful not to damage

the pipes and drain hose. Lock the side, center, and

bottom hooks in this sequence. Tighten the bottom

panel with the screws, and close the screw holes with

their cap.

<Lock the side hook>

<Fasten the screw>

<Lock the bottom hook>

<Assemble the Cap screw>

※Please read instructions on the back of this manual for “Smart install mode”. (Only for single system.)

Disassembling/Assembling the Cover Panel for Indoor Unit InstallationDB68-03934A-11

RAC 3050-PJT SIMPLE MANUAL_IM_EN_DB68-03934A-11.indd 12018-02-05 오후 3:35:16

Product specificaties