Ruvati Terraza RVH9742BL Handleiding
Pagina's 2 Wastafel
Bekijk de handleiding van Ruvati Terraza RVH9742BL gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
RUVATI USA
www.ruvati.com
J
Address: 2705 Meister Pl, Round Rock, TX 78664
USA Phone: 1.855.478.8284
Email: [email protected]
Register your product at: www.ruvati.com/register
INSTALLATION GUIDE
COLOR STAINLESS
APRON SINK
RUVATI USA
www.ruvati.com
CARE AND MAINTENANCE:
• Clean regularly with normal detergent and
warm water.
• Always make a habit of drying your sink after
use and buffing with a soft cloth. This will
ensure that no build up of lime scale or other
mineral deposits can occur.
• Clean the sink once a week using a
non-abrasive cleanser such as dish-soap and
a clean soft sponge. Rinse off with water and
wipe dry.
• Never let soap or other household cleaners
to dry on the surface of the sink. Most
products contain additives which will affect
the finish of the sink.
RVH9106, RVH9207, RVH9308,
RVH9660, RVH9733, RVH9742, RVH9880
• Never use bleach solutions on the sink, as it
is harmful to stainless steel. If left on the sink
too long it can cause surface pitting.
• Never use a steel wool pad to clean your
sink. Doing so may damage the sink’s
surface and cause discoloration.
• Minor scratching of the sink’s surface is
extremely difficult to avoid and is not
something to be unduly concerned about.
These marks are only superficial and will
blend in with time.
• Use of rinse grids will reduce exposure of
the bottom of the sink to scratches.
This product has been manufactured and inspected
to the highest possible quality standards. Ruvati sinks
carry a limited lifetime warranty for residential use.
Should you experience any defects in materials or
workmanship within the warranty period, we will
repair or replace the defective product, subject to the
following conditions:
• Any claim made under this warranty must include a
copy of a valid proof of purchase showing the date
and place of purchase.
• Our obligation under this warranty is to the original
purchaser only, and may not be transferred.
• Product replacement does not include shipping
costs or labor installation costs.
• This warranty applies to residential installations
only.
• Ruvati reserves the right to examine product in
question and its installation prior to replacement.
• If an identical replacement product is not available,
Ruvati reserves the right to replace the defective
product with a similar product.
NOTE: Accessories such as rinse grids, cutting
boards, strainers are not covered by this warranty.
This warranty relates to defects in manufacture,
materials or workmanship in a Ruvati kitchen sink
RUVATI LIMITED LIFETIME WARRANTY
supplied for installation into domestic premises
in the United States. It does not extend to :
• Damage resulting from failure to maintain the
product in accordance with the Care and
Maintenance instructions in this manual.
• Normal wear and tear, scratches or accidental
damage.
• Faults arising from improper use and/or
installation.
• Defects in accessories, strainers and rinse
grids.
All incidental or consequential damages are
specifically excluded. No additional warranties,
express or implied are given, including but not
limited to, any implied warranty of
merchantability or fitness for a
particular purpose.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages or limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also
have other rights which vary from state to state.
RUVATI USA
www.ruvati.com
RUVATI USA
www.ruvati.com
ATTENTION INSTALLER:
Please read all information below and keep this installation guide for future
reference.
Keep the sink fully covered after installation to keep away dirt and construction
dust, until all construction is complete and the site has been cleaned.
Ruvati recommends that this sink be installed only by a professional installer.
Sink edges may be sharp and can cause accidental injury if not careful. Wear
cut-resistant protective gloves during installation.
Inspect the sink and box contents immediately upon delivery. If you see any
shipping damages on the sink, or missing parts, contact Ruvati Support.
Due to the special nature of this sink, and the various installation options available,
no cutout template is provided. Use the actual sink for cutout measurement.
Ruvati recommends that an experienced cabinet maker use the actual sink to
build a custom cabinet or modify an existing cabinet. Ruvati is not liable for any
damages to sink or countertop or personal injury during installation.
Follow all local plumbing and building codes.
REVEAL
Alignment of sink to cutout is critical for a superior fit and finished look.
Depending on your aesthetic preference, Ruvati sinks can be installed either with
a 1/4” reveal or a flush fit. 1/4” reveal is recommended. Decide on your
preference prior to installation.
TOOLS REQUIRED
Plumbers Putty
Silicon Caulk
Jigsaw or Keyhole Saw
Pencil
1. Measure sink apron and cabinet opening to make sure sink apron will fit
into cabinet opening. If necessary, sand opening or add wood filler strips.
2. Prepare the cabinet and create a support frame inside the cabinet that the
sink will sit on. Use 2x4 solid wood studs to create the support frame. Your
cabinet and support frame should be strong enough to hold up to 200 lbs
of weight once installed. The support frame should be positioned so that
the top of the sink rim is level and flush with the top surface of the cabinet
perimeter. Make sure the support frame leaves room for the drains, faucet
water lines, garbage disposal (if any).
3. Place a thin layer of sealant on the supporting frame where it will contact
the sink.
4. Gently position the sink on the frame. Verify that the sink sits level and
sturdy on the frame, and the top surface of the sink is level and flush with
the top surface of the cabinet perimeter. Adjust or shim between the sink
and support if necessary.
5. Due to the various cutout sizes possible (based on your preference) a
cutout template is not provided. Use the actual sink measurement to
determine the actual location of the cutout. Ensure adequate clearance
behind the sink for any faucet and backsplash.
6. Trace cut-out opening on the countertop. Cut out the opening in the
counter top. Use an Orbital sander or sanding block to smooth the edge
of the cut-out area and remove all saw marks. For laminate type
countertop, all exposed unlaminated surfaces near the cut-out opening
must be adequately finished and sealed to prevent water damage.
7. Clean the rim of the sink and the under surface of the countertop where it
will contact the rim. Apply a generous bead of sealant around the sink
rim.
8. Gently position the countertop on the sink. Ensure that the sealant
provides a complete seal between the countertop and the sink. Wipe off
any extra sealant using a wet cloth, and apply extra sealant if there are any
gaps.
INSTRUCTIONS
COUNTERTOP
SEALANT
CABINET WALL
SUPPORTING
FRAME
2 SUPPORT BARS RUNNING BELOW
THE SINK (FRONT AND BACK)
1/4” REVEAL
Product specificaties
| Merk: | Ruvati |
| Categorie: | Wastafel |
| Model: | Terraza RVH9742BL |
Heb je hulp nodig?
Als je hulp nodig hebt met Ruvati Terraza RVH9742BL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden