Ruvati Tribeca RVH7497 Handleiding
Pagina's 2 Wastafel
Bekijk de handleiding van Ruvati Tribeca RVH7497 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
RUVATI USA
www.ruvati.com
B
Address: 2705 Meister Pl, Round Rock, TX 78664
USA Phone: 1.855.478.8284
Email: [email protected]
Register your product at: www.ruvati.com/register
INSTALLATION GUIDE
UNDERMOUNT SINK
RUVATI USA
www.ruvati.com
CARE AND MAINTENANCE:
• Clean regularly with normal detergent and warm
water.
• Always make a habit of drying your sink after use
and buffing with a soft cloth. This will ensure that
no buildup of limescale or other mineral deposits
can occur.
• Clean the sink once or twice a month using a
nonabrasive cleanser such as Barkeeper’s Friend
and a clean, soft sponge. Scrub in the same
direction as the natural grain of the sink.
• Never let soap or other household cleaners dry
on the surface of the sink. Most products contain
additives which will affect the finish of the sink.
• Never use bleach solutions on the sink, as it is
RVH6106, RVH6107, RVH6110, RVH6120, RVH6134, RVH6140, RVH7010, RVH7013,
RVH7015, RVH7100, RVH7110, RVH7111, RVH7112, RVH7113, RVH7114, RVH7115,
RVH7116, RVH7118, RVH7120, RVH7121, RVH7123, RVH7126, RVH7127, RVH7200,
RVH7250, RVH7255, RVH7300, RVH7350, RVH7355, RVH7357, RVH7400, RVH7401,
RVH7405, RVH7411, RVH7417, RVH7418, RVH7419, RVH7433, RVH7466, RVH7470,
RVH7480, RVH7490, RVH7497, RVH7515, RVH7533, RVH7630, RVH8150, RVH8400,
RVH8500, RVM4110, RVM4111, RVM4119, RVM4131, RVM4132, RVM4136, RVM4138,
RVM4200, RVM4250, RVM4300, RVM4301, RVM4310, RVM4315, RVM4350, RVM4400,
RVM4405, RVM4500, RVM4505, RVM4600, RVM4605, RVM4700, RVM5020, RVM5077,
RVM5099, RVM5227, RVM5239, RVM5231, RVM5300, RVM5307, RVM5815, RVM5908,
RVM5912, RVM5916, RVM5927, RVM5931, RVU6100, RVU6121, RVU6124, RVU6125
harmful to stainless steel. If left on the sink
too long, it can cause surface pitting.
• Never use a steel wool pad to clean your
sink. Doing so may damage the sink’s
surface and cause discoloration.
• Minor scratching of the sink’s surface is
extremely difficult to avoid and is not
something to be unduly concerned about.
These marks are usually only superficial and
can be removed with a proprietary stainless
steel cleaner.
• Use of rinse grids will reduce exposure of
the bottom of the sink to scratches.
This product has been manufactured and inspected
to the highest possible quality standards. Ruvati sinks
carry a limited lifetime warranty for residential use.
Should you experience any defects in materials or
workmanship within the warranty period, we will
repair or replace the defective product, subject to the
following conditions:
• Any claim made under this warranty must include a
copy of a valid proof of purchase showing the date
and place of purchase.
• Our obligation under this warranty is to the original
purchaser only, and may not be transferred.
• Product replacement does not include shipping
costs or labor installation costs.
• This warranty applies to residential installations
only.
• Ruvati reserves the right to examine product in
question and its installation prior to replacement.
• If an identical replacement product is not available,
Ruvati reserves the right to replace the defective
product with a similar product.
NOTE: Accessories such as rinse grids, cutting
boards, strainers are not covered by this warranty.
This warranty relates to defects in manufacture,
materials or workmanship in a Ruvati stainless steel
RUVATI LIMITED LIFETIME WARRANTY
kitchen sink supplied for installation into
domestic premises in the United States. It does
not extend to :
• Damage resulting from failure to maintain the
product in accordance with the Care and
Maintenance instructions in this manual.
• Normal wear and tear, scratches or accidental
damage.
• Faults arising from improper use and/or
installation.
• Defects in accessories, strainers and rinse
grids.
All incidental or consequential damages are
specifically excluded. No additional warranties,
express or implied are given, including but not
limited to, any implied warranty of
merchantability or fitness for a
particular purpose.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages or limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also
have other rights which vary from state to state.
RUVATI USA
www.ruvati.com
RUVATI USA
www.ruvati.com
ATTENTION INSTALLER:
Please read all information below and keep this installation guide for future
reference.
Keep the sink fully covered after installation to keep away dirt and construction
dust, until all construction is complete and the site has been cleaned.
Ruvati recommends that this sink be installed only by a professional installer.
Sink edges may be sharp and can cause accidental injury if not careful. Wear
cut-resistant protective gloves during installation.
Inspect the sink and box contents immediately upon delivery. If you see any
shipping damages on the sink, or missing parts, contact Ruvati Support.
Templates are only provided as a guide. Place template on sink to ensure the
template will give you the proper cutout for the sink. Ruvati is not responsible
for improper sink or countertop installation. Ruvati is not liable for any
damages to sink or countertop or personal injury during installation.
Follow all local plumbing and building codes.
RUST SPOTS?
This sink is made of T-304 stainless steel which can never rust. If you see rust spots in
your sink, it's due to external rust or iron particle contaminants. These rust particles
attach to the sink surface, forming rust stains. Clean the rust stains with "Barkeeper's
Friend" cleaning powder and a dish scrubbing sponge. Scrub in the direction of the
grain. Use toothbrush for corners and edges. Rinse thoroughly with water.
TOOLS REQUIRED
Plumbers Putty
Drill with Depth Stop
Sink Mounting Clips
Silicon Caulk
Phillips Head Screwdriver
Jigsaw or Keyhole Saw
Pencil
Sink Cut-Out Template
1. Place template on countertop. Position it such that the sink will have
proper clearance from cabinet.
2. Trace a line around the template. Determine what “reveal” you want your
sink to have (see previous page) and based on that, adjust the line
accordingly. Cut along the line.
3. Turn the countertop upside down,and mark evenly-spaced positions for
the anchors for the mounting clip. We recommend 3 mounting clips for
the longer sides (20" or longer), and 2 mounting clips for the shorter sides.
4. Drill holes for the anchors as shown below (follow countertop
manufacturer’s instructions). Use a
3
/
8
” drill bit with a ½“ Depth Stop to
avoid drilling through the countertop. Secure anchors into the countertop
(use glue if needed) and fasten mounting clips to the anchors using the
screws.
5. Clean the underside of the countertop and the rim of the sink. Apply
silicone caulk evenly around the rim of the sink.
6. Place sink over the countertop opening. Tighten the screws until mounting
clips are snug against sink.
7. Check alignment of sink to countertop opening and move slightly if you
have to.
8. Tighten down clips evenly without overtightening. Remove excess silicone.
1/4” Reveal : The countertop edge sits
approximately 1/4” back from the edge of the
sink and exposes the rim of the sink.
Flush Fit : The countertop meets the edge of
the sink, fitting flush with the sink bowl.
Alignment of sink to cutout is critical for a superior fit and finished look.
Depending on your aesthetic preference, Ruvati sinks can be installed either
with a 1/4” reveal or a flush fit. Decide on your prefence prior to installation.
REVEAL
INSTRUCTIONS
COUNTERTOP
SILICONE CAULK
SINK
MOUNTING
CLIP
SCREW
ANCHOR
Product specificaties
| Merk: | Ruvati |
| Categorie: | Wastafel |
| Model: | Tribeca RVH7497 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ruvati Tribeca RVH7497 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden