Russound IC-605 Handleiding

Bekijk gratis de handleiding van Russound IC-605 (5 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 133 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Russound IC-605 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

IC-605

Magnetic square grille

ICG-6S (sold separately)

Drill Pilot Hole

Mark Template

Outline

Test for

stud

clearance

Score

template

outline

Cut out

opening

Note:

Drill shallow to avoid damage to

wiring, pipes & ductwork.

For warranty information go to

www.russound.com/warranty-registration

speaker wire to the speaker location avoiding

all obstacles.

Russound offers Speaker Rough-In Brackets

bracket for speaker wire tie-off to keep the wire

from being lost during construction.

Make sure the speaker cut-out (hole) doesn't

of the mounting bracket.

for In-ceiling bracket installation.

wiring before cutting any holes in the ceiling.

for In-wall bracket installation

1.Center the cardboard template between

opening.

2.Score the outline of the template with a

utility knife to prevent chipping. If dealing

the pencil outline. Use a fine-toothed

keyhole saw or hacksaw blade with slow

strokes to saw through and remove the

inner surface.

3.Center the Speaker in the the cutout.

Rotate the frame as needed before

not overtighten.

Attach the speaker wires to the red and black

speaker terminals. Connect the Positive (+)

conductor to the Red terminal and the Negative

(-) conductor to the Black terminal. Make sure

that no stray strands of wire are touching the

other conductor or terminal.

10.15.20 | Rev 1

Product specificaties