RTS KP-5032PB Handleiding

Bekijk gratis de handleiding van RTS KP-5032PB (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over RTS KP-5032PB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide

KP-5032 Push Button

Keypanel

Included:

• ASSY KP-5032PB KEYPANEL

• POWER SUPPLY 60W 24V @0~2.5A

• KP-OEI2 POWER SUPPLY MOUNTING BRACKET

• Safety Instructions

• LIT Quick Start Guide F / RP5032

• RTS ADDITIONAL WEBSITE INFORMATION

• 2–POSITION, 2–CONTACT TERMINAL PLUG

• 6–POSITION, 12–CONTACT TERMINAL PLUG

Requirements:

• AZedit V 5.0.0 or later

• IPedit V 3.2.0 or later

• MCII-e V 3.2.0 or later

• AIO-16 V 1.6.0 or later

• FWUT V 3.0.3 or later

• DNS-SD V 3.0.3 or later

• OMI V 5.1.5 or later

Installation

IMPORTANT: If you plan to use the Power Supply Mounting Bracket, we recommend you install the mounting bracket before

cabling the keypanel. For detailed information, refer to the KP-Series Technical Manual.

To install the KP-5032PB, do the following:

1. On the rear panel of the KP-5032PB, plug the 24 Vdc power connector (A) of the power supply into the power connector on the

back panel of the unit.

2. Connect an RJ-12 or RJ-45 (568B or USOC) cable (B) with RTS cabling to the J8 FRAME connector on the rear panel. (analog)

OR

Connect an CAT-5e cable (C) to either J11 or J12 ETHERNET connector on the rear panel. (OMNEO CAT-5e)

IMPORTANT:IfyouhavetheoptionalJ13berconnectorinstalled,connectaberconnector(D)totheOPTICALber

connector on the rear panel. (OMNEO Fiber)

3. Once the unit is cabled, plug the other end of AC power supply cord into the wall outlet or power strip.

Product specificaties