Rossmax Qutie WE300 Handleiding
Rossmax
Vernevelaar
Qutie WE300
Lees hieronder de 📖 handleiding in het Nederlandse voor Rossmax Qutie WE300 (3 pagina's) in de categorie Vernevelaar. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
Manufacturer: Rossmax Swiss GmbH
Widnauerstrasse 1, CH-9435 Heerbrugg, Switzerland
www.rossmax.com www.qutie-rossmax.com
Model: WE300
EN
RM_IB_WE300_
EN_SW_ver2031
IN0WE3000000000XX
Technical data
Error Message Warranty Card
1. Maximum capacity: 20kgs
2. Minimum capacity: 100g
3. Graduation: 5g
4. Power source: 1x3V (CR2032) battery
5. Operating environment: 0°C- 40; < 80% RH
* Subject to technical modifications.
This instrument is covered by a 2 year guarantee from
the date of purchase, batteries and accessories are not
included. The guarantee is valid only on presentation
of the warranty card completed or stamped by the
seller/dealer conrming date of purchase or the
receipt. Opening or altering the instrument invalidates
the guarantee. The guarantee does not cover damage,
accidents or non-compliance with the instruction
manual. Please contact your local seller/dealer or
buying source or www.rossmax.com.
Customer Name: ____________________________
Address: ____________________________________
Telephone: __________________________________
E-mail address: ______________________________
Product Information
Date of purchase: ___________________________
Store where purchased:
_____________________________________________
Low power : Please replace the
battery immediately.
Overload : The weight of the baby
is over 20 kgs.
Manual Instruction
Thank you for your decision to purchase Rossmax baby
scale. Please peruse this instruction manual prior to rst
start up and carefully keep this user instruction so as to
have this information on hand whenever it is needed.
Introduction
Safety guideline
Measurement procedure
Automatic halt function
Manual halt function
Tare function
Switching between kg/lb/oz units
Name/Function of each part
• Always read the safety instructions carefully.
• Follow the basic safety precautions for all electronic
equipment when using this scale.
• Keep this instrucation manual for future reference.
• This unit is not waterproof. Don’t expose this product
to rain or moisture.
• Lay this equipment on a reliable at surface before
setting it up.
If any of the following situation arises, get the
equipment checked by the service technician:
-The equipment has been exposed to moisture.
-The equipment has been dropped and damaged.
-The equipment shows signs of breakage.
- Do not place the basic unit in a damp room at a
distance of less than 1.5m away from a water source.
• Don’t disassemble this scale. This scale doesn’t contain
any parts that can be repaired by the user.
• Use the scale only for its intended purpose.
• Clean the scale with a slightly damp cloth or with an
anti-static cloth. Never use cleaning agents or abrasive
solvents.
Installing battery
1. Press down and lift the battery cover to open the
battery compartment.
2. Install or replace one “CR2032” battery in the battery
compartment according to the indications inside the
compartment.
3. Replace the battery cover by clicking in the bottom
hooks rst, and then push in the top end of the
battery cover.
4. Remove battery when unit is not in use for extended
periods of time.
1. Press the ON/OFF/TARE key to power on, the scale will
appear zero “0.000” on the display after 2 seconds.
2. Put the baby on the weighing surface gently and
carefully.
3. Under the measurement, the word "HOLD" is ashing
on the display and stops ashing when measurement
is completed.
Caution
1. Battery is hazardous waste . Do not dispose it together
with the household garbage.
2. There are no user serviceable parts inside. Battery or
damage from old battery is not covered by warranty.
3. Use exclusively brand battery. Always replace with
new battery.
LCD display ON/OFF/TAREHALT
You need to replace the battery when
1. low battery icon appears on display.
2. the ON/OFF/TARE key is pressed and nothing
appears on display.
1. This scale has a “HALT” function for recording weight
with struggling baby .
2. The automatic halt function can establish the baby’s
weight on the display as soon as he/she is still enough
to achieve an exact measurement value.
3. As soon as the baby’s weight is established on the
display, the word “HOLD” stops ashing and the
measured weight will be displayed for 20 seconds.
4. The scale will be switched off automatically.
1. If the baby is struggling or moving around vigorously,
his/her weight cannot be recorded.
2. Press “HALT” button and the word “HOLD” will stop
ashing within 3 seconds and the measured weight
will be displayed for 20 seconds
1. If you use a towel to lay the baby on, it should be
placed on the weighing surface before switching on.
2. If you forgot to do so, power on the scale, when it is
ready to measure, place the towel on the weighting
surface, and then press “ON/OFF/TARE” button to
eliminate the weight of the towel.
3. Once you have pressed “ON/OFF/TARE” button, the
word “TARE” will be shown on the display. (Note:
If you remove the towel after press “ON/OFF/TARE”
button, the scale will display a negative reading.)
4. To reset the scale to zero “0.000”, press the “ON/OFF/
TARE” button after the word “HOLD” has stopped
ashing.
Click the unit key in the bottom side of the scale to
change the unit between “kg”, “lb” and “oz” if
necessary.
Product specificaties
| Merk: | Rossmax |
| Categorie: | Vernevelaar |
| Model: | Qutie WE300 |
Heb je hulp nodig?
Als je hulp nodig hebt met Rossmax Qutie WE300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vernevelaar Rossmax
28 Maart 2024
28 Maart 2024
26 Maart 2024
Handleiding Vernevelaar
Nieuwste handleidingen voor Vernevelaar
6 Mei 2023
5 Mei 2023
27 Maart 2023
21 Februari 2023
19 Februari 2023
10 Februari 2023
14 December 2022