Rolls PB23 Handleiding

Bekijk gratis de handleiding van Rolls PB23 (1 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 91 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over Rolls PB23 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PB23 MIC POWER I

PB23 MIC POWER I

PB23 MIC POWER I

PB23 MIC POWER I

PB23 MIC POWER I

6/04

The PB23 is for powering a phantom powered

microphone with a solid 48 VDC. The unit uses a

100kHz switching power supply to eliminate noise

generated by common power supplies. The PB23

has pull-down resistors so it will work with any

mixer.

INTRODUCTION

Thank you for purchasing the PB23 Mic Power I 48 Volt Phantom

Power Supply. This unit is designed and manufactured to provide 48

volts of clean dc power for your favorite condenser microphone.

Powered microphones provide much greater dynamic range, lower

noise, and better sound quality.

OPERATION

Connect a condenser microphone to a three conductor XLR cable,

and to the Input connector on the PB23. Connect the PB23 Output

to a mixer or other audio input device via another XLR cable.

Apply power to the unit by connecting the enclosed adapter to an

AC outlet and to the 12VDC Power jack. The LED on the front of the

unit will light. The PB23 provides no audio gain as it is not a

microphone preamp.

SPECIFICATIONS

Phantom Voltage: 48V

Jacks: Male and Female XLR jacks,

5mm DC input jack

Power Input 12 - 18 VCD (adapter included)

Size: 3" x 2.75" x 1.5"

Weight: 1 lb (.45 Kg)

PB23 MIC POWER I

Product specificaties