Rock N Roller R14G Handleiding

Bekijk gratis de handleiding van Rock N Roller R14G (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Rock N Roller R14G of wil je andere gebruikers van dit product iets vragen? Stel een vraag

R14G Model Specifications

Your RocknRoller Multi-Cart shipping box should

contain a frame and the following parts:

Recommended Tools For Assembly

Length (Compact) 42” 2 x½” lock nuts

Length (Extended) 2 x½” at washer60”

Channel Lock Pliers

(not included)

Width (Frame Bed) 2 x” x 1 ¼” cotter pins15”1/8

Width (Rear Wheels) 20”2 x20mm flat washers

Height (Folded) 2 x8"x 3" (200mm x 75mm) rear wheels10”

Height (Unfolded) 2 x6"x 3" (150mm x 75mm) stem casters38”

Front Casters 6” x 3”1 xFlat Wrench

Rear Wheels 8” x 3”1 xAssembly/instruction sheet

Weight 36 lbs.

Load Capacity 700 lbs.

1. Installing Rear Wheels

Gently slide wheel over axle as shown.

Do not force wheels onto axle. It is

recommended to lubricate axles with light

grease before installing. Install cotter pins

and bend ends outward.

2. Installing Front Swivel Casters

Attach front swivel casters as shown. While tightening lock nuts, grip

bearing cap with channel lock pliers or pipe wrench to prevent threaded

stem from turning. Tighten lock nuts rmly, but not excessively tight.

Check lock nut tightness on caster stems periodically.

Product specificaties