Rock N Roller R10RT Handleiding

Bekijk gratis de handleiding van Rock N Roller R10RT (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Rock N Roller R10RT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

R10RT Model Specifications

Your RocknRoller Multi-Cart shipping box should

contain a frame and the following parts:

Recommended Tools For Assembly

Length (Compact) 34” 2 x½” at washers

Length (Extended) 2 x½” lock nuts52”

Channel Lock Pliers

(not included)

Width (Frame Bed) 1 x 1” (25 mm) square plastic endplugs13.5”

Width (Rear Wheels) 20”1 x¾” (20 mm) square plastic endplugs

Height (Folded) 2 x” x 1 ¼” cotter pins11”1/8

Height (Unfolded) 2 x20 mm at washer40.5”

Front Casters 5” x 1.25”2 x10”x 3” (250 mm x 75 mm) rear wheels

Rear Wheels 10” x 3”2 x5”x 1.25” (125 mm x 32 mm) stem casters

Weight 30 lbs.1 xFlat Wrench

Load Capacity 500 lbs.1 xAssembly/instruction sheet

1. Installing Rear Wheels

Gently slide wheel over axle as shown.

Do not force wheels onto axle. It is

recommended to lubricate axles with light

grease before installing. Install cotter pins

and bend ends outward.

2. Installing Front Swivel Casters

Attach front swivel casters as shown. While tightening lock nuts, grip

bearing cap with channel lock pliers or pipe wrench to prevent threaded

stem from turning. Tighten lock nuts rmly, but not excessively tight.

Check lock nut tightness on caster stems periodically.

Product specificaties