Remington Balder Pro XR7000 Handleiding

Bekijk gratis de handleiding van Remington Balder Pro XR7000 (2 pagina’s), behorend tot de categorie Scheerapparat. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Remington Balder Pro XR7000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

XR7000

Use and Care Guide

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always

be observed, including the following. Please read all instructions

before using this shaver.

WARNINGS

To reduce the risk of burns, fire, electric shock, or injury to persons:

• When connecting the charging unit to a power source outside

of the USA or Canada, use a plug adapter suitable for the power

outlet. This device has a charging adapter that will work with

worldwide 100V-240V power outlets.

• Only use the power adapter provided with this device.

• Do not reach for the appliance if it has fallen into water while

plugged into the power source. Unplug from the power source at

the wall immediately.

• Shaver may be rinsed under water or used in the shower, but

never use the charging unit in the shower.

• Detach the shaver and charging unit from the power source

before cleaning.

• Except when charging, always unplug this appliance immedi-

ately after using.

• When recharging place in a safe position, out of the reach of

children and pets.

• Close supervision is necessary when this appliance is used by,

on, or near children or individuals with certain disabilities or

special needs.

• Use this appliance only for its intended use as described in this

manual.

• Do not use attachments not recommended or provided by the

supplier.

• Never operate this appliance if the electrical cord is frayed or

the plug is damaged.

• Keep the electrical cord away from heated surfaces.

• Never drop or insert objects into any of the appliances openings.

• This appliance is intended for household use only.

• Do not use outdoors, or operate where aerosol (spray) products

are being used, or where oxygen is being administered.

• Always attach the plug to the appliance, then to the wall outlet.

To disconnect, turn all controls to OFF, then remove plug from

outlet.

• Always pull on the plug body to unplug the appliance from the

wall socket. Never pull on the electrical cord.

• Do not plug in or unplug this appliance when your hands are wet.

• Do not use extension cords or a voltage converter with this

appliance.

• Do not wrap the power cord around the appliance.

• Always store the appliance and charger in low moisture area.

• Do not expose the appliance to temperatures over 140° F (60° C).

• Detach removable power cords from the appliance during storage.

• Do not use this shaver if the cutting head surfaces are damaged

or broken as skin injury could occur.

• This shaver and trimmer are intended for use on scalp hair only.

It should not be used for facial hair or longer hair on your body.

Product Features

SHAVER PARTS

1.On/Off Switch

2.Shaving Heads/Cutters

3.Pop Up Trimmer (not shown)

4.360° Pivoting Neck

5.LED Battery Indicators

6.Hair Pocket

7.Charging Pins

8.Power Adaptor

9.Head Guard

Also Includes:

• Cleaning Brush

• Shaver Lubricant

SAVE THESE INSTRUCTIONS

Specifications

GUIDELINES

• Do not attempt to shave head hair that is longer than 4 days

growth or 2.0 mm. The Ultimate Series head shaver is XR7000

intended to maintain the shaved look and can be used daily or

every two or three days.

• The Ultimate Series head shaver cannot shave long hair XR7000

down to the shaved length. If your hair is longer than 2.0 mm

you should trim it down with a hair clipper first before using the

head shaver.

• The Ultimate Series head shaver can be used dry or it XR7000

can be used with shaving cream or gel in the shower.

1. Hold the head shaver body in the palm of your hand. Press the

On/Off switch to turn the head shaver on.

2. Press the five cutting heads against your scalp. It is not

necessary to press hard to shave. Pressing hard does not cut

closer and could increase irritation. The cutting head will flex to

follow the contours of your head.

3. Move the shaver slowly around your head. You may use linear

strokes, or rotating motion, whichever you feel is most effective

picking up and cutting your hair.

4. Use a hand held mirror to check the back of your head to

confirm a complete and thorough shave. You may also use your

other hand to feel for complete and consistent cutting.

5. It is not recommended to use the head shaver for facial hair.

6. When finished turn the shaver off. Check for the red low charge

indication.

Shaving Your Head Charging

Register Your New Product Today!

By registering your new Remington

®

product, you will receive special offers.

Register online at: RemingtonProducts.com

Power SystemCordless

Initial Charge Time4 Hours

Full Charge Time4 Hours

Cordless Run TimeUp to 50 Minutes

Indicators2 LEDs (Low / Charging /

Full Charge)

Voltage TypeWorldwide 100 - 240V

WaterproofYES Fully Waterproof

Replacement Head and

Cutters

SPR-XR7000

Power System: Cordless - shaver can only be used when discon-

nected from the charging adaptor. The shaver will not run while it

is charging.

To preserve the life of the battery:do not charge the battery after

each use. The best practice is to use the shaver until the red low

charge indicator appears and then recharge.

Indicators:

• Low Charge: Flashes red when the shaver needs to be

recharged.

• Charging: When plugged in, the charging indicator will light up

green.

• Full Charge: Green LED indicator will turn off.

Note:Some countries will require the use of a plug adaptor that is

not included with your shaver.

Before using, read the important safety instructions in this manual.

1. Ensure the product is switched off. Connect the shaver to the

adaptor

2. a Connect to power outlet and charge for 4 hours when using

for the first time. This first charge is important to the shaver’s

battery life.

3. When plugged in, the charging indicator will light up green.

4. When empty, the battery should be charged for 4 hours for a full

charge and will provide up to 0 minutes of shaving time.5

5. To preserve the life of the battery do not charge the battery after

each use. Best practice is to use the shaver until the red low

charge indicator appears and then recharge.

Caution:

• Make sure the shaver and your hands are dry when charging the

shaver.

• Always charge the shaver in a cool, dry place.



















XR7000_30153_E_IB_D.indd 1

XR7000_30153_E_IB_D.indd 1

XR7000_30153_E_IB_D.indd 1

XR7000_30153_E_IB_D.indd 1XR7000_30153_E_IB_D.indd 112/7/23 3:23 PM

12/7/23 3:23 PM

12/7/23 3:23 PM

12/7/23 3:23 PM12/7/23 3:23 PM

Product specificaties