Reliable 6600VB Handleiding

Bekijk gratis de handleiding van Reliable 6600VB (2 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 31 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Reliable 6600VB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

VACUUM TABLE ASSEMBLY 6600VB

GENERAL

1.Remove all packaging/wrap from the vacuum table.

2.Confirm that you have the following loose parts:

CHIMNEY

CORD SUPPORT

CHIMNEY

1.From the back of the vacuum table remove the 2 BOLTS (use 8mm

wrench) and the 4 SCREWS (use Phillips head screw driver).

2.Using the 2 bolts and the 4 screws, attach the chimney (two people

may be needed for this task – one to hold the chimney and the other

to attach it with the supplied hardware).

CORD SUPPORT

1.Remove the bolt and 2 washers from the top of the vacuum table (a

small hole will now be visible).

2.Put 1 washer over the hole at the top of the vacuum table, place the

cord support ‘base loop’ over the washer then layer the second

washer on top of the ‘base loop.’

3.Using the bolt by placing it through the washers and ‘base loop,’

securely fasten the cord support to the vacuum table.

BUCK POWER

1.Open the ‘outlet’ by lifting the ‘locking flap’ firmly but carefully.

2.Insert the 4-pin plug attached to the buck(s).

3.Firmly close the ‘locking flap.’

CHIMNEY

CORD SUPPORT

screw

bolt

washer

locking flap

4-pin plug

BACK VIEWBACK VIEW

locking flap

4-pin plug

BUCK POWER

(back view)

BUCK POWER

(back view)

CORD SUPPORT

CHIMNEY

Product specificaties